i need help i am throwing codes po171 -po174 left and right bank lean any ideas on what the cause is and how to fix it thanks.:help:
96TangerineBossGT
08-01-2007 05:29 AM
Check your MAF sensor. I just had that problem with my 95 V6 mustang. I had the same 2 codes and after datalogging the MAF voltage, I found that it was barely even responding at all.
Scott
r3dn3ck
08-01-2007 08:16 AM
vacuum leak. also check PCV lines, breather hoses and vacuum lines. listen for a whistling while it idles. that'll help you find it.
96TangerineBossGT
08-01-2007 08:36 AM
Originally Posted by r3dn3ck
(Post 280928)
vacuum leak. also check PCV lines, breather hoses and vacuum lines. listen for a whistling while it idles. that'll help you find it.
^^ Also a possible solution, but I went through all of that myself when I had those 2 codes (no MAF sensor code either) and could not find any leaks at all, and verified with a vacuum gauge, and like I said, there was basically no voltage being sent to the computer and thus, too little fuel was being injected.
The vacuum leak would be likely be the cheaper fix. Check that first, but if you don't find any, go to the MAF sensor.
Scott
thundergod
08-02-2007 04:31 AM
thanks for the help hope to find the problem this weekend.:t:
