Mustang Boards

Mustang Boards (/)
-   Modular 4.6L Tech (https://mustangboards.com/modular-4-6l-tech/)
-   -   05-06 Tranny Capability (https://mustangboards.com/modular-4-6l-tech/10061-05-06-tranny-capability.html)

customstang 02-22-2006 07:53 PM

05-06 Tranny Capability
 
How much hp or tq can the new tranny's handle safely on the GT's (manual)

Also how much hp can the engine handle without replacing inerds...

Thanks

spike_africa 02-22-2006 07:56 PM

its the same as the one in the late-01-04 just the way the shifter mounts is different. it holds 360ft lbs. Its a good tranny and will take a good amount of abuse. Just use it till it breaks then upgrade you might go awhile before you need a beefed up one if you are making alot of power.

customstang 02-22-2006 07:59 PM


Originally Posted by spike_africa
its the same as the one in the late-01-04 just the way the shifter mounts is different. it holds 360ft lbs. Its a good tranny and will take a good amount of abuse. Just use it till it breaks then upgrade you might go awhile before you need a beefed up one if you are making alot of power.

Thanks for the speedy reply

How about the motor?

customstang 02-24-2006 06:46 PM

Anyone know how much the new engines can handle?

I8URVTEC 02-24-2006 07:24 PM

I've heard of them blowing up with only 6psi of boost which is about 500 hp. Its gunna take more time of them in use to get a better idea.

caballo 02-25-2006 02:11 AM

all the tuners are getting 500hp out of them with lil boost. Problems being reported are the clutch and the injectors. I haven't heard of anyone blowing em up around that level, but then again they don't mention reliability at that power level so you might want to keep askin' around to be sure...

I8URVTEC 02-25-2006 10:51 AM

Second that about the clutch. I have heard of them going and I have also heard of people with driveshaft problems at that level. Both are not a big deal to upgrade if you blow them though.

02Stang 02-25-2006 01:42 PM

**** the 3650 sucks it's rated at i think some where around 325-350 torque. Well I am well passed that on my race tune and i lost my tranny last night. so i would upgrade the tranny if any real power is going to be put down.

spike_africa 02-26-2006 04:56 PM


Originally Posted by 02Stang
**** the 3650 sucks it's rated at i think some where around 325-350 torque. Well I am well passed that on my race tune and i lost my tranny last night. so i would upgrade the tranny if any real power is going to be put down.


its 360ft lbs like i said above, but what do you think is so bad about this tranny?

02Stang 02-26-2006 08:19 PM

the syncros are weak and they go bad especially going into 3rd. My trany was working flawlessly before the blower than it started to go down hill from there. Like I said before if alot of power is going to be put down than it would be a good idea to upgrade.


All times are GMT -7. The time now is 02:59 AM.


© 2024 MH Sub I, LLC dba Internet Brands