no brakes?
everything is done on my rebuild but I have no brakes. Ive tried bleeding them about 5 times and nothing gives. Any ideas what could be wrong?
|
stuck pistons? Just a guess.
|
bleeding from the banjo bolt?
|
Did you try bleeding the master cylinder?
|
Originally Posted by bossman302
(Post 418147)
Did you try bleeding the master cylinder?
|
Is there a good read on how to bleed the master cylinder?
|
How exactly do you bleed the master cylinder? I did not do this
|
On the master cylinder there will be two bleeder screws that point towards the passenger side. Bleed them like you are bleeding your brakes. Crack open the bleeder while someone is pushing on the brake pedal. Do this till there are no bubbles. Do this on both. After that re-bleed the brakes. I suggest getting a rubber hose to put on the end of the bleeder and a bottle to catch the brake fluid.
|
thanks, ill start there
|
All times are GMT -7. The time now is 08:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands