o2 sensor help
3 Attachment(s)
Well this weekend I threw on some long tubes with my dad and went to plug in the o2 extensions to find they don't match up. The h-pipe didn't meet up with my current exhaust either so I can't put the those on till I get an exhaust shop to cut the 8 inch piece I need to complete each side. So I had to tie my sensors up to side on my ride home and needless to say the car was running like shit and was very rich. Open headers with no o2 sensors made for a fun ride home :rolleyes: lol.
The extenders I have match up with the MIL's (the blue and purple sensors) pattern but not the primary o2 sensors (green). Should I just cut the little tabs off on the sides on the o2's and slip them on anyways? I can deal with the check engine light from the MIL's till I get a tuner, but no o2's is something that I can't wait for. Don't really wanna splice. Opinions? Attachment 17843 Attachment 17844 Attachment 17845 |
Yes, just cut the tabs off. That's what I did. Some cutting pliers and a round file will make quick work of it.
|
Just take some wire and extend the o2 sensors, its very simple and much cheaper then o2 extensions. Return those extenders to where you got them from.
|
Originally Posted by bassman97
(Post 415292)
Yes, just cut the tabs off. That's what I did. Some cutting pliers and a round file will make quick work of it.
|
When did you get long tubes anyhow? does this mean you bought that nitrous kit and were gonna see some v6 power?
|
1 Attachment(s)
I got the long tubes about a week ago. I just kept finding deals that I couldn't pass up.
Attachment 17825 :D |
um, awesome?
Where was I when all of this happened? You need to post this up to give the other v6 power guys something to drool over. Didn't you get into an accident too the other week, is the car ok? |
Hell yeah, Sean! :D
Originally Posted by spike_africa
(Post 415582)
Didn't you get into an accident too the other week, is the car ok?
|
Originally Posted by SeanStang
(Post 415272)
I can deal with the check engine light from the MIL's till I get a tuner,
|
Originally Posted by rkaz
(Post 415596)
What will the tuner do for the engine light? I know they have a scanner in the tuner but won't the cars computer just throw the code again?
|
Originally Posted by rkaz
(Post 415596)
What will the tuner do for the engine light? I know they have a scanner in the tuner but won't the cars computer just throw the code again?
|
Originally Posted by spike_africa
(Post 415582)
um, awesome?
Where was I when all of this happened? You need to post this up to give the other v6 power guys something to drool over. Didn't you get into an accident too the other week, is the car ok? Oh yeah btw your helping me put the kit on the car very soon. I'll have the bottle mounted and the brain box mounted, just want your help running the lines and wires if you don't mind. The cars ok, the rear bumper is not lol. Some chick in a red mustang rear ended me, how ironic.
Originally Posted by Black Sunshine
(Post 415583)
Hell yeah, Sean! :D
I damn sure hope he/the car are okay. :(
Originally Posted by spike_africa
(Post 415735)
because he has long tubes its going to threw a check engine light and the tuner will turn off the light for this mod. So it wont toss a code for having long tubes and or no cats on the car.
|
So a tuner can keep the light from coming on if your car has no cats? I didn't know that. I thought you had to get the mil eliminators to trick the o2s.
|
Yeah there are splice in mil eliminators you can get, or you can just turn it off with a tuner. If I wasn't planning on getting a tuner I'd look into the eliminators.
|
Originally Posted by rkaz
(Post 415845)
So a tuner can keep the light from coming on if your car has no cats? I didn't know that. I thought you had to get the mil eliminators to trick the o2s.
|
I done spent my cash on the x pipe so I'm going to have to wait on the tuner and get the eliminators. I got a hand held scanner I just might use it to keep erasing the code til I can get the tuner. I'll just wait to see how quick the light trips.
|
I have a set of MIL's I need to sell if you want a pair cheap. Mine are from Steeda and are a plug in set. You just plug them inline with the rear o2 sensors and the light won't turn on.
|
Cheap is good right now. I'm going to need something so if you can let me know how much you want for them I'll more than likely take them off your hands. Thanks man
|
PM sent. and thread hijacking over, lol.
|
sean i aprove :) hurry up so we can race bitoch
|
damn i just realized i am falling behind the mod curve i need to order some new shit soon
:rolleyes: |
Originally Posted by mustangV6_04
(Post 416091)
sean i aprove :) hurry up so we can race bitoch
Should be really close dude. You'll have gears/posi over me, I won't be getting those in for awile. Only thing I'll have over you is the lt's, but also gotta add my drivetrain loss cause I'm auto.
Originally Posted by mustangV6_04
(Post 416092)
damn i just realized i am falling behind the mod curve i need to order some new shit soon
:rolleyes: |
Should be some close races with some v6 power.
|
Just got done messing with the car. Had a pretty nasty exhaust leak coming from the passenger side head. Some of the header bolts were a tad bit loose. My guess would be from the headers vibrating against the frame when it was open header for a few days. Just torqued them back down and started it up. Sounds much healthier, no more ticking noises coming out.
|
vids NOW!!!!
|
I'll get a vid up soon. I took a quick vid of it open header just before I left for the exhaust shop. Not sure why the sound cuts in and out, but my guess is because the noise was too fucking loud to record lol. This video no where near gives an idea of how loud it really was. If you've been to the track and heard those guys running open header then you know what I mean lol.
http://i138.photobucket.com/albums/q...h_GEDC0575.jpg |
Did you toss some loktite on the bolts? Cause that will help to keep them from coming loose.
|
Originally Posted by SeanStang
(Post 415580)
I got the long tubes about a week ago. I just kept finding deals that I couldn't pass up.
http://i138.photobucket.com/albums/q...8/GEDC0564.jpg :D |
sean where you get the long tubes??
|
Originally Posted by mustangV6_04
(Post 416275)
sean where you get the long tubes??
|
All times are GMT -7. The time now is 09:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands