Mustang Boards

Mustang Boards (/)
-   General Tech Forum (https://mustangboards.com/general-tech-forum/)
-   -   Car doesnt turn off (69 mustang) (https://mustangboards.com/general-tech-forum/28051-car-doesnt-turn-off-69-mustang.html)

Andy James G 01-07-2008 09:06 AM

Car doesnt turn off (69 mustang)
 
Hello there everyone I'm a new member and still pretty new to working on my car but i have enjoyed it very much. I have done only a few minor things (changed intake,carb,coil,spark plug wires,repainted motor,new shock tower and upgraded the front suspension) but enjoyed doing it so its sparked my interest to work on my car even more (69 mustang) But heres my problem

Recently i had my old shock tower removed and installed a new one in that process the motor was removed for a while. After reinstalling everything it was running great but one day when i got home i wanted to turn off my car and it wouldn't shut off. Ive asked a few people what they though it was and some have mentioned it might be the starter solenoid or maybe something to do with the neutral switch system ( i didn't understand this too great) i think its a small electronic system that goes in the transmission hmm im a bet lost as i mentioned before I'm still pretty new to this you guys have any ideals of what it could be? Thanks for any info:)

r3dn3ck 01-07-2008 09:30 AM

your key is not shutting off the switched 12v systems including current to the coil. I'd try and find the short starting from there. A volt-ohm-meter is a good investment. You can find them as cheap as 6-7 bucks.

Andy James G 01-07-2008 09:53 AM

great thank you i appriciate the help and ill look into the volt-ohm-meter

stanger00 01-07-2008 10:58 PM

doesnt that little solenoid on the strut tower have something to do with the starting system? if so that could be the problem... i dont know.

but do what r3d said...thats the last known power source so find the wire that shuts the car down and do a OHMs check on the wire. when doing ohms checks you have to isolate the wire so disconnect both ends and if the wire is good you will here a BEEP.


get a good wire diagram of the ignition system and try to trace it. i never worked on a classic car but i troubleshoot electrical systems for a living.

GreenOOgt 01-07-2008 11:16 PM

If it is still running points style ignition dizz sounds like you need a ballast resistor wire inline with the coil.

Shawn

Andy James G 01-09-2008 04:27 PM

Thanks everyone for the tips!

99_GT 01-12-2008 05:22 AM

I would think that the ignition switch has a problem. I would need more info on the problem.
PS: My first car was a 70 Stang. 38 years ago....


All times are GMT -7. The time now is 07:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands