Rear ends
Im looking at the Auborn 31 spline but is this the best one to get?
|
Didnt we already go over this?
|
Originally Posted by 03gtmustang
Didnt we already go over this?
Yeah but I cant find the thread.... |
Originally Posted by 03gtmustang
Didnt we already go over this?
|
Originally Posted by stage2roush2002
Im looking at the Auborn 31 spline but is this the best one to get?
I have heard good things about Auborn...another good Differential would be the Eaton Posi units. Either or will be good... |
Whats going to be the difference. I dont think he needs a spool.
|
if u want a strong rear...get the following parts
*Ford T-Lok *FRPP 31 Spline Axel *Ford Racing Girdle *Any One of These kits or FRPP Gears (if u already have the Tuner) thats the exact setup im getting...its also the same as 40thblckgt's setup too |
Thats what Im running except for a trick flow cover.
|
Originally Posted by 03gtmustang
Thats what Im running except for a trick flow cover.
but that is the best setup on a conservitive budget i think....besides...id rather stay w/ ford stuff as much as possible |
you could also throw in a Powertrax locker. It replaces the clutches and spider gears (you don't even have to pull the carrier to get it in) and you end up with a very strong detroit locker. The ratcheting action has been really quieted down but there is still some. The upshot is full traction to both tires without being a spool. They're quite strong.
Other than that, eaton, auburn, Torsen, 31sp T-Lok are all fine. I like the T-lock less than any other LSD but it's still a decent unit on its own merits. |
is this a god deal
i found a shop in Cleveland TN, that will put a 355 or 373 Motive gear in for 325.00 labor and all - what else should i have done - axel ect Thanks |
everything in the rear end....go up to post 7? and look at the things i posted there....thats what u should do if money allows it
|
huudoo, yes that's a great price for gears and install. If you're not going to be putting giant power down or doing lots of hard launches, then just do the gears and save the axle money for when you need it.
If you've got a hardon to do axles then moser or superior axles are quite nice and they're no extra labor to put in. |
ive been installing moser axles and a eaton posi all week in my car. im excited :) the quality seems really great so far by both.. we'll see how it does next month with some slicks and 5k launches
|
I'm sure I don't have to remind you that you can still frag an Eaton diff wtih hard launching. Otherwise, sounds like you're about ready to start making some really killer times. :punk:
|
I just bought a new 31 spline t lok with carbon clutches and new 31 spline frpp axles for under $500 total. An eaton is over 400 by iteslf, granted it is a better unit but imo not that much better.
|
yeah...kind of a bummer that you end up nearly doubling the cost for a 25% bump in performance but, that's life. You got to pay to play.
|
I dont think the Eaton is any better then the Ford unit. Plus Im auto so even though Im launching off a 100 shot with a 3500 stall, Im still not shocking the rear end like you 5 speed guys and 5k+ launches.
|
1 Attachment(s)
Originally Posted by PureStang
if u want a strong rear...get the following parts
*Ford T-Lok *FRPP 31 Spline Axel *Ford Racing Girdle *Any One of These kits or FRPP Gears (if u already have the Tuner) thats the exact setup im getting...its also the same as 40thblckgt's setup too Attachment 26878 |
All times are GMT -7. The time now is 08:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands