Mustang Boards

Mustang Boards (/)
-   General Tech Forum (https://mustangboards.com/general-tech-forum/)
-   -   Motor oil amount ? (https://mustangboards.com/general-tech-forum/13625-motor-oil-amount.html)

02-STANG-GT 05-17-2006 05:53 PM

Motor oil amount ?
 
replying to the closed thread, Ichanged my oil in my 02 gt 4.6 , 6 qts w/ filter ,, 5 didnt even make it on the dip stick, book calls for 6 in my manual, hainey manual said 5 , figure that one out and let me know why ,,,,

dfroster 05-17-2006 05:57 PM

Six with filter!!Put the drain plug back in!!:)

02-STANG-GT 05-17-2006 06:10 PM

Thats what I thought too, also had another prob with the oil cap, went to ford garage for a replacement oil cap, the one that they gave me that was supposed to fit didn't , took it back, and brought mine to show them what I had and they found out that some mustangs have a oil cap on them from a f150 pick up, I have the part no. if anyone runs into this prob, its ironic now I have the oil amout difference !!!!! go figure

dfroster 05-17-2006 06:19 PM

In 02 they changed the caps, or I should say started to. Older have screw on, newer have twist. It's the same with the trucks. You should not take more than six unless you used a full quart filter FL1A or equal number. The shorter filter and change will take six to the fill line.

Saleen S330 05-17-2006 06:19 PM

The only mustang i know that needs 6 qts is the Cobra. Also how many valve cover bolts does your car have? 11 or 13? just one side.

02-STANG-GT 05-17-2006 06:19 PM

Just felt like getting evey one the part no, Before u buy a billet oil cap , take the time and check your part no. its under the cap when u remove it I own a 02 GT .If your part no. is EC-756 IFIZ-6766-AA you "cant" use the screw cap, your cap has a "notch" in it ,then it screws in, the replacement is althreades and it will not fit , I found out the hard way , so double check

02-STANG-GT 05-17-2006 06:21 PM

Thanks defroster, I thought I was loseing it, 6 qts

dfroster 05-17-2006 06:25 PM


Originally Posted by 02-STANG-GT
Thanks defroster, I thought I was loseing it, 6 qts

Both my Ford books 1999 and 2004 state six with filter. Cobra's the same.

02-STANG-GT 05-17-2006 06:27 PM

Glad you replied , Iwas starting to look like an idiot , LOL

Saleen S330 05-18-2006 12:43 PM

I found this out for mustangs specifications

DIMENSIONS AND CAPACITIES

Length 183.2

Width 73.1

Height 53.1

Wheelbase 101.3

Track, f/r 59.9/60.1

Fuel capacity (gal) 15.7

Oil capacity 4.8 qt

Coolant capacity 12.6 qt

Also if you scroll down this forum someone asks the same for an 01 mustang and they say 5 qrts. My friends have anywhere from 99 to 04 mustangs and always put 5 qrts in theirs, i've only seen cobras take 6 qrts.

4.6 Love 05-18-2006 12:48 PM

My manual states 5 qts with filter! I've always used 5 and it get the dipstick to where it should be....

stevemainian 05-18-2006 02:42 PM

My manual says 6 quarts for my 03 GT. And thats exaclty what it takes too.

dfroster 05-18-2006 03:39 PM


Originally Posted by stevemainian
My manual says 6 quarts for my 03 GT. And thats exaclty what it takes too.

Page 215...all v8 6 with filter...all v6 5 with filter

Saleen S330 05-18-2006 04:42 PM

well, everyone knows their mustang, so if it's good for 5, then use 5, if it's 6, then use 6. If your not sure, go with 5 first and if it needs more, then it's 6. As long at the oil is within the hash marks, you are good to go, doesn't have to be at the very top or very bottom, just in the hash marks.

dfroster 05-18-2006 04:56 PM


Originally Posted by Saleen S330
well, everyone knows their mustang, so if it's good for 5, then use 5, if it's 6, then use 6. If your not sure, go with 5 first and if it needs more, then it's 6. As long at the oil is within the hash marks, you are good to go, doesn't have to be at the very top or very bottom, just in the hash marks.

Agree 100%. I know mine takes six but I still add five, run then check and add as needed.


All times are GMT -7. The time now is 05:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands