Mustang Boards

Mustang Boards (/)
-   General Tech Forum (https://mustangboards.com/general-tech-forum/)
-   -   stik swap (https://mustangboards.com/general-tech-forum/13069-stik-swap.html)

Steeda21 05-05-2006 09:22 PM

stik swap
 
how much would a stick swap be. For a T5 its 1300 but would labor make it come out to like 2500 or something?

spike_africa 05-05-2006 09:46 PM

i wouldnt pay 2500 to get a stock t-5 installed in my car. with that money you can get a built auto tranny with a convertor and install it with some freinds and run way faster then the stick car.

02LaserRedGT 05-05-2006 10:08 PM

I've been quoted $750 for my auto to t56 swap.

Icefreezen 05-05-2006 10:57 PM


Originally Posted by 02LaserRedGT
I've been quoted $750 for my auto to t56 swap.

Holy crap. Where at? thats almost worth making a drive to get it done if your far away.

Parts and labor?Tune?

02LaserRedGT 05-06-2006 07:46 AM

Modular Powerhouse. labor only.

I already have all the parts ready for the swap.

spike_africa 05-06-2006 07:50 AM

lol i am sure its just labor the tranny alone is over $2300.

02LaserRedGT 05-07-2006 05:26 PM

I paid $1999 for Cobra t56 trans, bellhousing, crossmember, and driveshaft from D&D. The kit was on sale.

TClark22 05-07-2006 07:48 PM

ahh i want to convert mine to a manual too...and yea i know "build up your auto"...but auto's are no fun

its either a procharger or a transmission for me...lol hmm :confused: (duh more power!!!)

i wish a six speed would work on a sixer...that would be tight

Wesman 05-07-2006 08:12 PM


Originally Posted by 02LaserRedGT
I paid $1999 for Cobra t56 trans, bellhousing, crossmember, and driveshaft from D&D. The kit was on sale.

Thats awesome, good luck with it.

3V2000GT 05-08-2006 08:50 PM


Originally Posted by 02LaserRedGT
I paid $1999 for Cobra t56 trans, bellhousing, crossmember, and driveshaft from D&D. The kit was on sale.

plus 500 core charge + pedal assembly (2-300) plus cluth and flywheel and new computer or computer tune

02LaserRedGT 05-08-2006 10:25 PM

500 core charge? Must be something new considering I didn't pay that. Pedal assembly was 100

mcmmotorsports 05-09-2006 04:35 AM


Originally Posted by The2000GT
plus 500 core charge + pedal assembly (2-300) plus cluth and flywheel and new computer or computer tune

He shouldn't have to pay for a re-tune. I am Tim (MPH) is including that in the price for the install ($750).

CCM 05-09-2006 04:37 AM

I'll put up the full parts list when I get home tonight.

CCM 05-09-2006 05:17 PM

OK, here's the best parts list I can give you:

1. Transmission
2. Bellhousing
3. Shifter
4. Crossmember
5. Speedo Cable
6. Input Shaft
7. Flywheel
8. Flywheel Bolts
9. Clutch
10. Pilot Bearing
11. Pressure Plate Bolts
12. Clutch Fork
13. Dowel Pin
14. Firewall Adjuster/Quadrant/Clutch Cable
15. Clutch/Brake Pedal Assembly
16. Shifter Bezel w/ Boot
17. Manual Wiring Harness

That's the best list I can give you. I only know because I'm doing the same thing myself.

Icefreezen 05-09-2006 05:38 PM

Missing a few things there CCM but those are the major components

CCM 05-09-2006 07:47 PM


Originally Posted by Icefreezen
Missing a few things there CCM but those are the major components

What am I missing?

Icefreezen 05-09-2006 08:05 PM


Originally Posted by CCM
What am I missing?

I have a full list, part numbers and everything lying around here somewhere i'll try and post it up tomorrrow.......I thought about doing the swap and did the research and when I decided just to build up my auto I through it aside because it was gonna be a pain in the arse.

CCM 05-10-2006 04:16 AM


Originally Posted by Icefreezen
I have a full list, part numbers and everything lying around here somewhere i'll try and post it up tomorrrow.......I thought about doing the swap and did the research and when I decided just to build up my auto I through it aside because it was gonna be a pain in the arse.

If you could find it that would be sweet.

02LaserRedGT 05-10-2006 03:22 PM

http://www.2kgt.com/item.php?itemid=105

Icefreezen 05-10-2006 03:32 PM


Originally Posted by 02LaserRedGT


That saves me some work typing...........plus or minus the type of tranny you want on that list

CCM 05-10-2006 07:23 PM


Originally Posted by 02LaserRedGT

That's basically where I developed my list from.


All times are GMT -7. The time now is 01:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands