Not Pleased with New Headlights
2 Attachment(s)
Recently purchased a set of smoked clear corners from AM.com. First of all, I know you guys dont manufacture these things and you dont test-fit every part in your inventory. My disappointment is not with AM, simply the fitment of these lights.
Thats about 1/2" gap between the light and the fender. yes, its in there as far as it will go. When standing directly over it you can see the backside of the housing clear as day. First time any water gets back there........ Attachment 25145 Passnegers side isnt as bad but its still an eyesore. Attachment 25146 While I wasnt expecting OE quality, I wasnt expecting the fitment of a square into a round hole. Again, my discontent is not directed at the good people at AM. You guys have done well by me in the past and Im hoping you will continue that trend. I only installed these to test fit them, I havent driven anywhere with them installed yet. Is there anything AmericanMuscle can do? An exchange? Refund, store credit? Please, contact me via replying in this thread, by PM, or calling me ( I will have to PM someone my #. I did not use my CC to order these, they were a gift from the queen). Thank You |
Originally Posted by helty
(Post 253522)
Recently purchased a set of smoked clear corners from AM.com. First of all, I know you guys dont manufacture these things and you dont test-fit every part in your inventory. My disappointment is not with AM, simply the fitment of these lights.
Thats about 1/2" gap between the light and the fender. yes, its in there as far as it will go. When standing directly over it you can see the backside of the housing clear as day. First time any water gets back there........ http://i20.photobucket.com/albums/b2...corners001.jpg Passnegers side isnt as bad but its still an eyesore. http://i20.photobucket.com/albums/b2...corners002.jpg While I wasnt expecting OE quality, I wasnt expecting the fitment of a square into a round hole. Again, my discontent is not directed at the good people at AM. You guys have done well by me in the past and Im hoping you will continue that trend. I only installed these to test fit them, I havent driven anywhere with them installed yet. Is there anything AmericanMuscle can do? An exchange? Refund, store credit? Please, contact me via replying in this thread, by PM, or calling me ( I will have to PM someone my #. I did not use my CC to order these, they were a gift from the queen). Thank You PM me and let me know about when you'll be calling :) Emilie |
Originally Posted by AMEmilie
(Post 253585)
Of course we can do something! I'm sorry about this...that's certainly not what we expect from our manufacturers. Give us a call on Monday and we'll be happy to take care of you. If you talk to someone other than me and they give you trouble, tell them I said it was okay, or ask to speak to me.
PM me and let me know about when you'll be calling :) Emilie |
Thank You Emilie!
One last thing.....I work for FedEx and get a very generous discount. Would there be any issue with me sending them out today? They could be there tomorrow or wednesday at the lastest. I would pay out of my own pocket and not ask for anything from AM.com. It wont cost me more than $10 would be more convenient for me. Just curious. Thanks again. |
Originally Posted by helty
(Post 254083)
Thank You Emilie!
One last thing.....I work for FedEx and get a very generous discount. Would there be any issue with me sending them out today? They could be there tomorrow or wednesday at the lastest. I would pay out of my own pocket and not ask for anything from AM.com. It wont cost me more than $10 would be more convenient for me. Just curious. Thanks again. |
I just bought the same lights, and i have the same problem. The passenger side isn't as bad, but the driver's side is a good .25-.5 inch. Could i just load it with silicone? Or send it back?
|
I have the same lights and they leak like a mother! ive taken them off let them dry out re-silicone them and they still friggen fog up! its a shame because I really like them there just cheap and very poorly sealed!
|
So you have the gap too? I think i'm just going to take my chances on them, and just seal it as much as i can.
|
Originally Posted by Steeda97
(Post 279149)
So you have the gap too? I think i'm just going to take my chances on them, and just seal it as much as i can.
|
Originally Posted by Stan
(Post 279153)
nah mine fit well actually its just they leak and fog up like no tomorrow and have no idea how to fix them.. i've sealed them twice already all the way around :(
|
Originally Posted by zigzagg321
(Post 279155)
could they be leaking from where the light socket screws in on the back? bad o-ring there perhaps?
|
Originally Posted by Stan
(Post 279165)
nope I cleaned both of the o-rings out because they had a shitty seal and resealed them.. so im clueless!
|
Originally Posted by zigzagg321
(Post 279167)
you could do a dunk test with them...seal the light socket hole and dunk the assembly...use a flashlight to see where the water is coming in.
|
Originally Posted by Stan
(Post 279176)
might have to do that its just annoying how they come so poorly sealed from the factory, the factory glue is all over the place and some is even inside the lense that dripped down..
|
Originally Posted by zigzagg321
(Post 279187)
wow...that is some shoddy workmanship.
but i'll most likely do the water test and get to the bottom of it! |
Originally Posted by Steeda97
(Post 279141)
I just bought the same lights, and i have the same problem. The passenger side isn't as bad, but the driver's side is a good .25-.5 inch. Could i just load it with silicone? Or send it back?
Emilie |
Originally Posted by Stan
(Post 279147)
I have the same lights and they leak like a mother! ive taken them off let them dry out re-silicone them and they still friggen fog up! its a shame because I really like them there just cheap and very poorly sealed!
Emilie |
Thanks!
|
Originally Posted by AMEmilie
(Post 279533)
With all aftermarket lights, you should reseal them with RTV sealant before installing. Give us a call, and we should be able to do something for you.
Emilie |
Well i would guess that they don't have the exact specifications that Ford has when they make OEM headlights.
But besides that, AmericanMuscle.com is seriously the best place around for Mustangs, the customer service is unbelievable. |
Originally Posted by Steeda97
(Post 279683)
Well i would guess that they don't have the exact specifications that Ford has when they make OEM headlights.
But besides that, AmericanMuscle.com is seriously the best place around for Mustangs, the customer service is unbelievable. |
I sent you a PM, Emilie.
|
Originally Posted by v6'stang
(Post 279610)
i don't want to sound like a jackass. AM.com is the best around, but doesn't ANY of these companies (headlight companies) make a decent light that don't have to be fixed before they're put in? i mean seriously that's rediculous. i was considering gettin' aftermarket headlights but i've seen so many problems w/them on here i'd rather keep the stock ones. again, this isn't necessarily to AM, it's more to the shitty company(s)/craftmanship that make these lights.
On my daily driver -- a Pontiac -- my factory headlights leak and condensate everytime it rains. |
Originally Posted by Steeda97
(Post 279862)
I sent you a PM, Emilie.
|
Originally Posted by AMEmilie
(Post 280747)
I agree with you, but even the stock lights get sealed to death before being installed. It's the nature of headlights, honestly.
On my daily driver -- a Pontiac -- my factory headlights leak and condensate everytime it rains. |
Originally Posted by v6'stang
(Post 280792)
i guess i'm thinking this way because it hasn't happend to me. every vehicle i've owned and my fam. has owned has nvr had that prob. almost all are ford and all have the factory headlights. and i suppose ya could expect that from a pontiac :P
But hey, I'm getting almost 40 MPG with it, so I'm complaining too much. |
my passengers side is ok but my drivers side will fog up like crazy from the humidity I have no idea were its coming from its driving me crazy I've sealed every possible area water could be coming in from!
|
All times are GMT -7. The time now is 03:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands