What Cam?
Looking for the best cam to use with a stock 302 bottom with afr165 non-emissions cylinder heads, a trick flow upper and lower track heat intake manifold, bbk 70mm throttle body, bbk 1 5/8" long tubes and 75mm pro-m mass air. It's not a daily driver so I want it to have good mid-range to upper hp and torque. Thanks!
|
most will recommend a custom grind cam but if you want a good shelf cam try an anderson ford motorsport cam. i've used the N-41 and it was a nice upgrade from the F-303 cam that was in the car to start with. if you call Rick Anderson and tell him your combo i'm sure he'll steer you in the right direction. 217.935.2384
http://www.andersonfordmotorsport.com/ |
+1 on the Anderson Ford Cams, I have been running the B451 for 2years now and love it.
|
Either that or call Comp cams and see what they have for you.
|
Originally Posted by stangfreak
(Post 413583)
most will recommend a custom grind cam but if you want a good shelf cam try an anderson ford motorsport cam. i've used the N-41 and it was a nice upgrade from the F-303 cam that was in the car to start with. if you call Rick Anderson and tell him your combo i'm sure he'll steer you in the right direction. 217.935.2384
http://www.andersonfordmotorsport.com/
Originally Posted by 94IVGT
(Post 427321)
+1 on the Anderson Ford Cams, I have been running the B451 for 2years now and love it.
|
All times are GMT -7. The time now is 05:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands