95 Mustang 8.8 rearend 5 lug disk brake with 4.10 gears
 

95 Mustang 8.8 rearend 5 lug disk brake with 4.10 gears
will this rearend fit on a 98 v6 mustang? and how would I go about doing this?

any info on 7.5 to 8.8 rearend swap would be helpful

simple unbolt old bolt new up. no more than a 2-3 hour job max

<H1 style="MARGIN: auto 0in">http://www.3.8mustang.com/wiki/Rear_Axles_That_Fit

Rear Axles That Fit

From 3.8Wiki

There are lots of vehicles with 8.8's
the only ones that are a direct bolt-in to 94-04 Mustangs are from 94-04 Mustangs.
The follow cars have an 8.8 housing that will bolt into a Mustang with minimal modification (i.e. no welding, just changes of brakes/axles, maybe minor cutting on the rear) include:
Mark VII (NOT the Mark VIII)
some 88 and older tbirds and cougar, especially the 87-88 TurboCoupe
86-93 Mustang
86 Capri
79-85 Mustang and capri with an 8.8 rear swapped in by the owner after the car was produced
if you can't find one in your particular junkyard, use www.car-part.com to search junkyards in your area and across US and Canada for the rears.
</H1>

ok..listen closely..

the 8.8 from that mustang can easily be bolted up to your car. they share the same body style and places to mount, ect. bolt it up.