how to remove emblems??

Jonny5 · 03-22-2006, 11:54 PM

Are the emblems on the '03's attached adhesively? If so, what's the best way to remove them without damaging the paint?

Thanks for any help!!

And on a side note......
I have a black pony edition- just put on my chin spoiler and must say it really cleaned up the look of the front end. Other mods: 18" wheels, tinted windows, dual exhaust, cold air intake, shorty antenna

soon to come: grill delete and I gotta get this thing lowered!!!!
ANY SUGGESTIONS FOR OTHER MODS WELCOME!!

whitethunder46 · 03-22-2006, 11:57 PM

Way I do is take a screw driver. Behind the screw driver I put either a towel/cloth/sponge so that it wont touch the paint. They just peal off. After that I use goo gone to take off the remaining adhesive (there will be some)

All the emblems have studs on the back of them so there will be a hole on the fenders/trunk still if you were planning on going badgeless.

spike_africa · 03-23-2006, 08:37 AM

use a blow dryer and heat them up and it will just peel right off and leaves little mess, then use goo gone and it takes all the goo left off of there.

swervo · 03-23-2006, 03:20 PM

Those other ideas work, but I find this much easier. Like Spike said, heat up the emblem with a heat gun/hair drier and get it nice and hot. Get some fishing line or dental foss (fishing line is better) and saw the emblem off. Next just pull off the rest of the two sided tape that's left over and use some adheasive remover to get all the adhesive off. Next get some rubbing alcohol and clean up the area. I think this is the best and easiest way to do it without scratching your paint.

Grimmz · 03-23-2006, 03:44 PM

Quote:

Originally Posted by swervo

Those other ideas work, but I find this much easier. Like Spike said, heat up the emblem with a heat gun/hair drier and get it nice and hot. Get some fishing line or dental foss (fishing line is better) and saw the emblem off. Next just pull off the rest of the two sided tape that's left over and use some adheasive remover to get all the adhesive off. Next get some rubbing alcohol and clean up the area. I think this is the best and easiest way to do it without scratching your paint.

do you guyz also have some tips on filling in the holes left over?... I'm wana remove my FORD emblem to even out the rear a bit... any cheap/easy ways to do this without having to go to a painter... Oh and how big of a hole am I looking at?

whitethunder46 · 03-23-2006, 04:08 PM

Quote:

Originally Posted by Grimmz

do you guyz also have some tips on filling in the holes left over?... I'm wana remove my FORD emblem to even out the rear a bit... any cheap/easy ways to do this without having to go to a painter... Oh and how big of a hole am I looking at?

1/8 inch diameter, maybe 1/4

03-23-2006, 06:49 PM

Use dental flos. use it to saw behind the emblem then once you got the foam backing cut, you can pull the emblem off, get some 3mm adhesive remover and yer done!

66pony · 03-23-2006, 07:19 PM

i just shaved all my emblems and you have to paint after you fill them in it looks really good though its worth it

03-22-2006, 11:54 PM	#1 (permalink)
Jonny5 Junior Member Join Date: Feb 2006 Location: Seattle, WA Posts: 3	how to remove emblems?? Are the emblems on the '03's attached adhesively? If so, what's the best way to remove them without damaging the paint? Thanks for any help!! And on a side note...... I have a black pony edition- just put on my chin spoiler and must say it really cleaned up the look of the front end. Other mods: 18" wheels, tinted windows, dual exhaust, cold air intake, shorty antenna soon to come: grill delete and I gotta get this thing lowered!!!! ANY SUGGESTIONS FOR OTHER MODS WELCOME!!

03-22-2006, 11:57 PM	#2 (permalink)
whitethunder46 Always Detailin' Join Date: Oct 2005 Location: Dayton, OH Posts: 3,556	Way I do is take a screw driver. Behind the screw driver I put either a towel/cloth/sponge so that it wont touch the paint. They just peal off. After that I use goo gone to take off the remaining adhesive (there will be some) All the emblems have studs on the back of them so there will be a hole on the fenders/trunk still if you were planning on going badgeless. __________________ supernissans.net 2001 Mustang GT - Saleen Replica - SOLD 2007 Nissan Sentra 2.0S http://www.cardomain.com/ride/3022272

03-23-2006, 08:37 AM	#3 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,953	use a blow dryer and heat them up and it will just peel right off and leaves little mess, then use goo gone and it takes all the goo left off of there. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

03-23-2006, 03:20 PM	#4 (permalink)
swervo Can you hear me now? Join Date: May 2005 Location: Jacksonville, NC Posts: 911	Those other ideas work, but I find this much easier. Like Spike said, heat up the emblem with a heat gun/hair drier and get it nice and hot. Get some fishing line or dental foss (fishing line is better) and saw the emblem off. Next just pull off the rest of the two sided tape that's left over and use some adheasive remover to get all the adhesive off. Next get some rubbing alcohol and clean up the area. I think this is the best and easiest way to do it without scratching your paint. __________________ 2004 Black Mach 1 HP Twin 57mm turbo kit tuned by Modular Powerhouse 460rwhp/479rwtq at 7lbs with 10* of timing on a stock block

03-23-2006, 07:19 PM	#8 (permalink)
66pony Member Join Date: Nov 2005 Posts: 53	just had my filed you have to paint i just shaved all my emblems and you have to paint after you fill them in it looks really good though its worth it

03-23-2006, 06:49 PM	#7 (permalink)
Jack The Ripper Posts: n/a	Use dental flos. use it to saw behind the emblem then once you got the foam backing cut, you can pull the emblem off, get some 3mm adhesive remover and yer done!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
post pics of sportline or h&r sport springs please	bb1211	Pictures	13	04-17-2006 02:53 PM
grille delete arrivial	PureStang	AmericanMuscle	2	04-17-2006 01:37 PM
Jason24	Slither	SMACK Talk!	36	02-25-2006 07:52 PM
nitrous question?	arodriguez05	Power Adders	10	11-05-2005 06:00 PM
another exhaust question	Erik	V6 Tech Forums	11	06-03-2005 10:19 AM