Pirelli or Nitto?

Blue Thunder · 05-25-2006, 04:14 PM

Ok so for my daily driving mustang bullitt which hets raced occasionally which tires would be better? I live in the hill country. Nitto 555's or Pirelli Pzero Nero's?

MattJ · 05-25-2006, 04:30 PM

i have pirelli pzero neros and I like em. good tread wear as well and I have over 50+ passes on em with about 12k miles and they are still kickin ass.

They also turn sticky in hot weather if you dry spin em at the strip.

Grimmz · 05-25-2006, 06:48 PM

+1 for Pirelli... They're wet water traction is damn good too... I've done atleast 3 good burn outs with them and they still aren't even dented with tread wear.... they just cost an Arm and a leg...

Icefreezen · 05-25-2006, 07:43 PM

Nitto 555's in the front and Nitto DR in the rear for the win

TClark22 · 05-26-2006, 10:20 AM

Quote:

Originally Posted by Grimmz

they just cost an Arm and a leg...

lol they dont cost alot...on discount tire you can get a 265/35/18 for under 200...i thought that was cheap for a pirelli

3V2000GT · 05-26-2006, 12:19 PM

nittos

Codiddy · 05-26-2006, 11:16 PM

+1 for Pirellis . . . my 06 came from the factory with them and they are awesome.

05-25-2006, 04:14 PM	#1 (permalink)
Blue Thunder Speed Demon Join Date: Sep 2004 Location: Austin, TX Posts: 487	Pirelli or Nitto? Ok so for my daily driving mustang bullitt which hets raced occasionally which tires would be better? I live in the hill country. Nitto 555's or Pirelli Pzero Nero's? __________________ Bullitt Mods: 4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's. Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.

05-25-2006, 04:30 PM	#2 (permalink)
MattJ Senior Member Join Date: Dec 2004 Location: Racine, WI Posts: 10,243	i have pirelli pzero neros and I like em. good tread wear as well and I have over 50+ passes on em with about 12k miles and they are still kickin ass. They also turn sticky in hot weather if you dry spin em at the strip. __________________ 2001 Mustang GT Premium - Mineral Grey

05-25-2006, 06:48 PM	#3 (permalink)
Grimmz Jack Touched Me...I Cried Join Date: Aug 2005 Location: Tallahassee, FL/ Gaithersburg, MD Posts: 3,751	+1 for Pirelli... They're wet water traction is damn good too... I've done atleast 3 good burn outs with them and they still aren't even dented with tread wear.... they just cost an Arm and a leg... __________________ 2003 Manual V6 "ETHEL" My CarDomain::Updated 12/31/05:: Engine Start-Up, Rev,and Walk Around , Drive By 3.8 Mustang Forum Exhaust's DSG Registry #0032 Props to Slither for the Sig!!!

05-25-2006, 07:43 PM	#4 (permalink)
Icefreezen Mustang Superman Join Date: May 2005 Location: Your mom's bed Posts: 3,908	Nitto 555's in the front and Nitto DR in the rear for the win __________________

05-26-2006, 12:19 PM	#6 (permalink)
3V2000GT 46MONSTER Join Date: Jan 2006 Location: Wheaton, IL Posts: 2,209	nittos __________________ 2000 GT Black on Tan, TKO 600: 370rwhp 370rwtq NA Built 3v 2004 Honda CBR 600 F4i Black/Red 2000 SVT Lightning Silver i love jinny!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! lucky is awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

05-26-2006, 11:16 PM	#7 (permalink)
Codiddy Senior Member Join Date: Mar 2006 Location: California Posts: 1,776	+1 for Pirellis . . . my 06 came from the factory with them and they are awesome.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rear deck	PureStang	General Tech Forum	2	10-14-2006 11:42 AM
New oil field is a joke	SlicK	Political Talk	0	09-08-2006 07:11 PM
stupid noob question	Codiddy	V6 Tech Forums	18	04-01-2006 02:51 PM
Compounding bolt ons, more impact?	Jack The Ripper	Modular 4.6L Tech	12	03-02-2006 08:29 PM