Mustang Boards - Bump Steer Kit

- Suspension Talk (https://mustangboards.com/suspension-talk/)

- - Bump Steer Kit (https://mustangboards.com/suspension-talk/36754-bump-steer-kit.html)

bassman97

06-20-2009 11:46 AM

Bump Steer Kit

What's a good estimate of the spacer arrangement for the MM kit on a 3/4" lowered car? Alignment specs should be what MM recommends (caster=4.5°, camber=-.5°, and toe should be 1/16-1/8" toe in).

01FR500

06-20-2009 04:17 PM

I have no idea. Wish I could help but I haven't looked into bumpsteer adjustment since I don't have a good way to measure it.

r3dn3ck

06-21-2009 11:00 AM

edit: thought you were talking about CC-plates.

The Tie Rod should be paralell with the A-Arm (in general) after all the spacers are on and the car is sitting at ride height.

stanger00

06-22-2009 11:31 AM

Quote:

Originally Posted by r3dn3ck (Post 415000)

edit: thought you were talking about CC-plates.

The Tie Rod should be paralell with the A-Arm (in general) after all the spacers are on and the car is sitting at ride height.

+1...that is all i found out. i made my tie rods about even with the A-arms when the car is sitting on the ground with suspension loaded.

bassman97

06-23-2009 05:21 AM

Sounds fair enough. Thanks for the help guys.

All times are GMT -7. The time now is 05:55 PM.