Bullitt Handling Kit

engineman312 · 02-20-2008, 04:17 PM

Has anyone used this set up for their car? http://www.blueovalindustries.com/pr...p?pid=99011423

i own a 94 V6, and i live in New York City. I do a lot of city driving, so i'm not looking for a huge drop, but i am looking for something that will handle.

bassman97 · 02-20-2008, 06:19 PM

I got the FRPP Handling Pack (which I believe is what you are describing since it's the stuff from the Bullitt/Mach 1) and compared to my Eibachs I had before, the FRPP blew it away. Plus, despite being less of a drop, the FRPP springs were either shorter/same size as the Eibach so when you hit a bump/pot hole, you'll be less likely to bottom out due to the extra stiffness. If I were you, I'd get it from buyfordracing.com since it's under $500 shipped (though it's usually backordered there).

jareds98gt · 02-21-2008, 03:24 PM

i have the bullitt kit and its pretty good. id do coilovers if i was gonna do it again. if you go with the bullitt kit try speedconcepts.net

*venom* · 02-21-2008, 09:13 PM

I like them as they will not bottom out in the front like Eibachs but I removed the isolators to get more drop as it sits to high with them on.

02-20-2008, 04:17 PM	#1 (permalink)
engineman312 Senior Member Join Date: Mar 2005 Location: new york city Posts: 106	Bullitt Handling Kit Has anyone used this set up for their car? http://www.blueovalindustries.com/pr...p?pid=99011423 i own a 94 V6, and i live in New York City. I do a lot of city driving, so i'm not looking for a huge drop, but i am looking for something that will handle. __________________ K&N CAI, BBK TB, Pacesetter dual exhaust adaptor, Magnaflow dual exhaust, Steeda Tri ax shifter, GT front brakes, 8.8" rear, 3.73s

02-21-2008, 03:24 PM	#3 (permalink)
jareds98gt Senior Member Join Date: Jan 2006 Location: Nor Cal Posts: 306	i have the bullitt kit and its pretty good. id do coilovers if i was gonna do it again. if you go with the bullitt kit try speedconcepts.net __________________ Mods 03 PI 4.6 swap FRPP shorties, o/r X, Flowmaster 40's JLT Ram Air King Cobra clutch Bullitt suspension 255 whp - 275wtq FOR SALE!!!! $7000 OBO summer project: 97 Saleen- 04 pi motor, in the car

02-21-2008, 09:13 PM	#4 (permalink)
venom Super Moderator Join Date: Sep 2004 Posts: 5,267	I like them as they will not bottom out in the front like Eibachs but I removed the isolators to get more drop as it sits to high with them on. __________________ http://www.mustangboards.com/mustang...500/ppuser/103

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2008, 06:19 PM	#2 (permalink)
bassman97 blank Join Date: Jun 2006 Location: North Jersey Posts: 1,369	I got the FRPP Handling Pack (which I believe is what you are describing since it's the stuff from the Bullitt/Mach 1) and compared to my Eibachs I had before, the FRPP blew it away. Plus, despite being less of a drop, the FRPP springs were either shorter/same size as the Eibach so when you hit a bump/pot hole, you'll be less likely to bottom out due to the extra stiffness. If I were you, I'd get it from buyfordracing.com since it's under $500 shipped (though it's usually backordered there).