Caster/Camber Plates

jeffroandy · 09-27-2007, 07:03 PM

I have a 1998 GT and the previous owner lowered it with a spring kit and I have a caster/Camber problem. The tops of the front wheels lean inward. If I purchase the after market Caster/Camber plates is there more adjustment on those compared to stock plates to correct this problem? Thanks!

v6'stang · 09-27-2007, 07:10 PM

i believe they do offer a couple more degree's of adjustment. also i've heard MaximumMotorsports.com makes the best ccplates.

jeffroandy · 09-27-2007, 07:34 PM

Thanks! I don't know what the factory settings are but I will find out. After I install the new plates I will take it in for an alignment. As I can see the stock plates are at there full outward adjustment. Thanks again for the feedback.

cobra1923 · 09-28-2007, 05:10 AM

I think I remember that if it is dropped more than an inch it will make the stock CC plates worthless and require some additional means of adjustment.

jeffroandy · 09-28-2007, 07:03 AM

What other means of adjustment are you talking about? Do you mean new caster/camber plates or some other modification to the stock plates?

09-27-2007, 07:03 PM	#1 (permalink)
jeffroandy Junior Member Join Date: Sep 2007 Posts: 17	Caster/Camber Plates I have a 1998 GT and the previous owner lowered it with a spring kit and I have a caster/Camber problem. The tops of the front wheels lean inward. If I purchase the after market Caster/Camber plates is there more adjustment on those compared to stock plates to correct this problem? Thanks!

09-27-2007, 07:10 PM	#2 (permalink)
v6'stang Senior Member Join Date: Mar 2005 Location: FL Posts: 927	i believe they do offer a couple more degree's of adjustment. also i've heard MaximumMotorsports.com makes the best ccplates. __________________ Mods: 17x9 black cobra wheels, BBK CAI, tru dual flowmasters, sct 4bank elim. chip, motive 3.73's, frpp t-lok. ...and the list grows.

09-28-2007, 05:10 AM	#4 (permalink)
cobra1923 Senior Member Join Date: Nov 2004 Location: Baltimore Posts: 564	I think I remember that if it is dropped more than an inch it will make the stock CC plates worthless and require some additional means of adjustment. __________________ 2003 10th Anniversary Cobra Convertible All Stock and staying that way... well maybe some pipes since it's so quiet..ahhhh! it's a sickness 1995 mustang GT vert - all black (almost back together)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-27-2007, 07:34 PM	#3 (permalink)
jeffroandy Junior Member Join Date: Sep 2007 Posts: 17	Thanks! I don't know what the factory settings are but I will find out. After I install the new plates I will take it in for an alignment. As I can see the stock plates are at there full outward adjustment. Thanks again for the feedback.

09-28-2007, 07:03 AM	#5 (permalink)
jeffroandy Junior Member Join Date: Sep 2007 Posts: 17	What other means of adjustment are you talking about? Do you mean new caster/camber plates or some other modification to the stock plates?