The headlights on my Stang are quite foggy. I was talking to some people at work who work a lot on their cars (4 of them, all 4 drive Honda Preludes) and they said I could get something from Auto Zone called by maguires. Some sort of headlight cleaner. Someone said they had been using it every day for 2 weeks and it is just now starting to look better. Has anyone used this or anything like it? Or should i just shill out the $199 for smoked clear corner headlights?

 

if u have the 99/00 chrome lights or whatever the stock ones are, the **** usually doesnt come clean.. i tried with mine for awhile and just got new lights

 

here is a write up on how to fix them: http://www.3.8mustang.com/forum/show...ht+restoration

however sometimes in the long run your better off just buying new ones

 

Its fairly easy to clean up the headlights. It takes some wet sanding and polishing. That is a fine write up, but I wouldnt start with 600 grit. Start with something lighter and if that doesnt work, then go to something more aggressive. The stuff from Meguiars is Plast X, looks like thats what the guy who did that write up used also.

 

were in the same boat . im just ordering new headlights this week.

 

i tryed to fix mine, but if there foggy on both sides of the of the plastic if wont work.

 

I can't tell, but it looks like it is on both sides. I think I might just buy some new ones, I can spare $199

 

New headlights FTW

 

X2, but I have wet sanded a couple of sets of headlights and it helps alot. I started with 800 grit and then stepped up progressively to 2000, then finished with plastic restoring stuff. It cleared up the yellowing of the 99/00 headlights and helped with the cloudyness of 01+ headlights.

 

Okay this weekend I am going to try and wet sand them myself, see how they look. And if I need to I will get some new ones. Thanks for the advice everyone! I just joined here and already have learned more in the few days than I have in years beforehand.

 

I wetsanded and polished my friend's headlights on his passatt last week. Used Meguiar's Plast-x to polish.







started with 800 grit.

 

Did you do yours by hand or with a polisher/sander? If I need the tools I can probably hit up my Uncles body shop.

 

That's a big improvement on that Passatt, good job. I did mine by hand, but I would have liked to try using a polisher or something.

 

Did it by hand

and thanks

 

wow those vdub lights look a lot better

 

+1 did a great job on those pcola

 

Got my new headlights a few weeks ago and they look great. Try this place online, they accept paypal too. Fast shipping also.. I paid about $135.00.

http://www.1aauto.com/

 

eh, i dont like em.

 

at work we used 1500 grit sand paper to wet sand then rubbing compound with a buffing wheel on a drill then use polish and a foam wheel to finish. comes out great.

 

What's not to like? Only thing is you need your turn signal bulbs. They look exactly like the OEM stock lights and fit perfect. Headlights don't stay new looking forever..

 

you said 135 :/ it says 132+17shipping

 

nvm.. 150 shipped. but eh still a good price. how fast was shipping? they look good?

 

I just went and bought myself some masking tape, 800-1000-1500 grit wetanddry sandpaper, and some PlastX to polish them with when I am done. I will do this tomorrow, obviously take pictures of the before and after. Will a polyfiber towel be okay to apply the PlastX? And I think someone said to make sure to apply a clear coat when I am done with the job, what brand should I be looking to buy?

And for someone who has done this. How long did you spend sanding with each grit of sandpaper?

 

About 5-10 minutes with each piece of sand paper, I used a microfiber-applicator to apply and work in the plast-x, and spent a good 20 minutes working the polish in.

 

Did you just use the PlastX or did you spray a clear coat over that?

 

n ot to hi-jack the thread but im also interesed in doign this. so all i'll need is 800-1000-1500 wet or dry sandpaper? whats the differentce between them? do you pour water on em to make it wet? lol but after im done all i need to do is polish it with plastx?

 

Didn't use a clearcoat, chances are the clearcoat will peel off anyway because of UV exposure. You'll just have to polish them up a bit with plast-x every once in a while.

 

Yeah the sandpaper will actually say wet/dry on it. Basically means you can sand with it wet, or you can sand with it dry. Just keep water on it while you sand your headlights.

 

lol alright, thank you

 

It's best to keep flowing water over the light while your sanding.