thebeastum

I have 2 12 in subs in walmart boxes for now. I would like to see what you guys have done or have gotten done for you. to maybe see what I can do for a custom enclourse for 12's. thanks

__________________

pypes x pipe
mac cai
flowmaster 40 series
steeda tri ax
mustangworld 70mm throttlebody
bbk underdrive pullies

thebeastum

what nobody has 12 in subs?

__________________

pypes x pipe
mac cai
flowmaster 40 series
steeda tri ax
mustangworld 70mm throttlebody
bbk underdrive pullies

Codiddy

just have an audio shop measure your trunk dimensions and they can make something for you. or if you're pretty handy, you can do it yourself. the important part is making sure the internal cubic feet of the enclosure matches what your sub requires

__________________

SnTBakosFinest

delete kit ftw :x

03_GT

__________________

2003 GT
5 Speed
JLT CAI
UPR Off-Road X-Pipe
SLP LM 1
Steeda Tri-ax short throw

www.myspace.com/rustysurfer07

thebeastum

a rear delete seat kit is not what i want to do. thats a cop out. im a mechanic and as you know we make it fit.

__________________

pypes x pipe
mac cai
flowmaster 40 series
steeda tri ax
mustangworld 70mm throttlebody
bbk underdrive pullies

SnTBakosFinest

And as a mechanic you don't work with wood, so you have no idea what it takes to actually build one.

zigzaggthefag321

hey, Im a mechanic and I also have a propensity for woodworking as well.

SnTBakosFinest

shhh you're going to make him think he can do it. ;x

Oh and BTW with a rear seat delete..you still might wanna build the box behind it.. can plexi the back so when you pop your trunk you still see it..its not just carpeted wood ect..and it looks great in mustangs. Now if you have a few midgets you wanna tote around..then a backseat delete may not be for you.

And before you go on being a dick, it was just a simple idea, you never said "A BOX TO FIT MY TRUNK" you just said ideas.

And I don't care if you're a mechanic or not dude, sometimes 12s just won't fit. You also have to build a box to the right dimensions so it sounds good still, doesn't overheat, bla bla bla, and you still want it to look clean.

Go look in the "FOR SELL" section and look what he got done. Personally, I wouldn't go that way..i like my thump being closer to my seats..not next to my license plate..but to each his own I guess.

zigzaggthefag321

I tend to encourage the DIY thing.

2001blackgt

I had a JL 12w7 in mine for a while just get about any box on ebay but make sure you get the box with the smalled height you can find, preferably 13". I had to take out the spare tire and angle the box around to get it under the trunk lip but after that i scooted it over slid the tire back in. I didn't, but you also you may want to look into taking the amp rack out.

__________________
2001 Mustang Gt
- K&N intake
- Flowmaster 40's
- Hypertech III programmer
- 180 degree thermostat
- 3.73 gears.

yellowstang99

Single 12 in the spare tire well.

__________________

01FR500

This is what I did with my two 10s but you could probably do something like that with 12s. Did all the fiberglass work myself, shops cost too much.

__________________

2003 GT

theponyfactor

Do you have the mach audio system? Because that amp rack makes it a pretty tight fit for subs, my 10" sub box that I made fits but I have to push on it pretty hard to get it in.

__________________
1995 3.8L Ford Mustang

Chrome 17" fr500s//Mac Y-Pipe Exhaust//SS Bumper Inserts//H&R Sport Springs//Mach 1 Takeoff Shocks & Struts//MM C/C Plates//Very Slow

01FR500

Yeah, the Mach 460. If you were asking me.

__________________

2003 GT

thebeastum

yeah i have the mach system. but i want something better than walmart boxes. and something more custum.

__________________

pypes x pipe
mac cai
flowmaster 40 series
steeda tri ax
mustangworld 70mm throttlebody
bbk underdrive pullies

Wolters_88

01fr500 do you ahve any more pics of that setup? Mainly the amp tray. I know how you did the box's.

01FR500

Yeah I have some pictures. Some are in this how-to.
http://www.gotstang.com/howtos.php?h...=7&step=1#jump
The amp rack is made out of MDF with fiberglass over it. There are spaces for the wires and cooling. I will try to post a couple of good ones of it w/o fiberglass if they are still on my computer.

__________________

2003 GT

ChrisGT

01fr500.....how long did it take you to complete this project? What were the costs of the materials? Did you check to make sure the subs had the proper air space?

01FR500

The materials were around $150, I didn't keep up with the cost much as I went along but I know I didn't spend a fortune. And that is a lot less than the $500+ that the local audio shop quoted me at, most of that probably labor.

I worked on it on and off for several months, but when I actually worked on it, I could get a lot done. Other then the mold for the right side, I finished the fiberglass work on it in one day. If you have the time, materials, and can dedicate yourself to it, It may only take a week or two from beginning to end.

As for the air space for the subs, I didn't check, just estimated. My subs called for 1.25 cubic feet of un-ported space, which isn't much. I had already built a regular rectangular enclosure and had a good idea of how much space I needed. I could have filled it with water or cotton balls and then measured but I didn't really care. The actual only reason I got the subs and built the fiberglass enclosures in the first place were for shows. I've grown to like the bass notes though.

__________________

2003 GT