compucar nitrous
 

hello i bouth a used nitrous kit .can someone tell me how the wires go ....there 2 wires coming from the solenoids im guess one goes the WOT switch and the other is ground...and then run power from battery the toggle switch and then a wire from toggle to WOT...it also came with bottle warmer but im not sure how that gets wired up. and where should i mount the solenoids . thanks for the help.

bought****

www.compucar.com?

One wire is ground the other is power. You need to figure out what pathway you're delivering current through and then make the solenoid the LAST thing that sees juice before it goes to ground. I'd also make sure there's a relay in there. You don't want to run big juice through a switch.

You can run them in many different setups.

Here is a wiring diagram to help you out. You use the bottom one for your setup.
http://www.compucarnitrous.com/image...ang_wiring.jpg

so was anything i said about the wiring right. Because when i look at that wiring link it looks like about what i said but do i get the 12v power right from the battery or couold i use the cig lighter power ...the kit came with couple diff. jets ones for 50 90 125 and 150 hp can i run 90 hp jets a stock tune .....sorry for all questions

Yep you can run the 90 on a stock tune. I ran the 125 hit on a stock tune with fuel pump upgrade for years. They jet their kits very rich to keep them safe. But unless you have the balls just run a 90hit and get used to it.

so am i right with the wiring ....and where do i tap in for power to the switch

did you look at the schematic? It's pretty easy to deal with. Really though , use a damned relay.

not the answer i was looking for but ok....

You can get 12v switched power from where ever you want to. Mine is from under the dash at the fuse box.

thank you