Selling the '65....
I apologize for the long ad, but I felt it was necessary lol.
Alright guys, sadly I'm having to sell my '65 GT350 Replica. With 36,500 ORIGINAL miles. We bought the car back in July of 2007. It was a project car for me and my dad. The car is originally a Fastback, but of course has been transformed into a GT350 Replica. When we first got the car home it had a few issues. The driver side rear floor panels were rusted out so we replaced the entire floor panel. The 4-speed toploader that it had originally had a broken gear so we replaced it with the World Class T5. And then the 9" rear it did have we swapped for one with disc brakes and 31 spline axles. So no expense so far has been spared for this car, and although its not a 100% mint show car, it still turns plenty of heads and is definitely not a car I want to get rid off Car runs strong and everything on it has been either restored or replaced with newer parts. My asking price is $30,000 OBO, I know with the economy that may be steep but with the mods it has I believe its still a steal. The only thing I'd be willing to trade for would be a semi-low miles Mazdaspeed 3 or SVT Focus plus cash on my side of course. Thanks for looking guys. I'll list the specs first and then the bads (if you really consider them bad lol) Engine: 302 bored .030 over with flat top pistons GT40 heads ported and flow benched to a Victor JR intake Jomar Stud Girdles Competition valvetrain springs and rockers Lunati Cam #30613 (specs below) MSD Ignition Edelbrock 1406 Performer Series Carb w/ electric choke Shorty Headers (can't remember brand) with Stage 8 locking bolts Drivetrain: World Class Borg Warner T5 (The gear ratios I can give if needed) Ford 9" Rear Moser 31 spline axles 4.10 FRPP Gears New Timken Bearings Custom made one-piece steel driveshaft from Denny's Driveshaft Suspension: 11" disc brakes front and rear JMC Twin Master Cylinder SS lines for all the brakes Brand new front springs and leaf springs Torque boxes were replaced with the floor panels Have a lot of suspension parts laying in a box that have yet to be put on as well (all OEM replacements) Exterior: Toyota Spectra Blue (Code 8M6 - Very close to Vista Blue and matches my GT very well) with white stripes Shelby Front Valence Shelby Side Scoops Shelby Hood American Racing Torq Thrust Wheels (15x7) BFG Radial T/As (Front 205/60 Rear 225/60) Shelby Replicated Side Exhaust Brand new Headlights and housings Also, the entire underbody of the car is coated with POR15. So no worries about rust anymore. I lost two pairs of glasses to that stuff too lol. Interior: Brand new interior from carpet to the seats and rear deck. Autometer gauges for water temp and oil pressure mounted on bottom of dash Classic "running pony" lap belts (both sides) I'm sure I'm forgetting a few things, but those are the main things. Most of the parts on the car as far as suspension/drivetrain/exterior go have been replaced since we bought it. And we've only put 5,000 miles on it since '07 and thats mostly a weekend drive every now and then, or a drive go to a car show or take pictures lol. Now for the cons, and this is being very picky about it all for being an almost 50-year old car. The paint is not immaculate, it was already painted when we bought the car. There are a few rock chips from normal street use and also a few mishap spots in the paint (two small puddle spots, and one spot were the blue bled onto the white of the stripes). Still a show car, and has gotten plenty of great compliments at the local car show. The chrome trim around the a-pillar windows could be replaced as well, have a bit of oxidization to them. The factory gauge cluster should probably be replaced. The gas gauge is off and shows half when its actually full. We've replaced the fuel level floaters and its still off so I'm pretty sure its the cluster. The cluster was also never replaced from the way it looks (some oxidation), so if you wanted show car quality that'd be a must. Parking brake lever doesn't work. Have a new one, have just yet to put it in. So, just a minor thing there. The rest of the cabling is fine, just the part inside the cabin is broke. The last thing is the motor (not really a con). It runs fine, but it was the only thing that I haven't touched myself other than the intake and carb. The rest was all there when we bought the car, and its just an OCD of mine of not having my personal stamp on it. Motor runs fine, idles great, and will keep up with my bolt-on/4.10 '08 GT. So its definitely strong. The only reason it hasn't already been rebuilt is because I had plans on going FI (a Termi swap actually lol) so I left it as is for now since it runs fine. As stated before, the car is immaculate in my eyes considering how old it is and the fact that it is a street driven car. The car has never been at the track, launched hard, or beaten on. I don't NEED to sell the car so lowball offers aren't apprecated. My father passed away this last February, and although the car holds many great memories and is definitely one of my dreams cars, with our current situation I could much rather use a different car than another mustang. No expense has been spared for this car, and I'd love to see it go to a good home. PM me or e-mail me (cody08mustanggt@gmail.com) with any questions or offers. $30,000 OBO. Car is located in Kearney, MO (just north of Kansas City). Thanks, Cody Pictures are all in Flickr under the set titled 1965 Shelby GT350 Replica 1965 Shelby GT350 Replica - a set on Flickr Here is also all the spare parts I have that will go with the car. Brand new FRPP trans gasket kit Brand new clutch fork cover Brand new front brake cable (shipped two and was just told to keep it lol) RH and LH door latches (sometimes hard to close the ones that are on the car now) Autometer Sport-Comp Tach Triple gauge (Oil pressure, volts, water temp) gauge pod to replace the dual one thats in there now Brand new Sctoo Drake "running pony" emblem Old alternator and carb (alternator just got replaced by a chrome one, the carb needs to be rebuilt) Full rubber seal kit (little rubber push-in seals, have like 50 of assorted sizes) The rest of the POR 15 kit (nasty stuff) Brand new urethane coil spring isolators Two brand new coil spring seats with rubber bushings Brand new parking brake lever |
Good luck Cody, wish you much luck selling this great pass time that you and your father shared togethor!
Have you tried putting this on facebook? |
Originally Posted by krazypony
(Post 466286)
Good luck Cody, wish you much luck selling this great pass time that you and your father shared togethor!
Have you tried putting this on facebook? As well as some classic car sites. And thanks for the wishes. :D |
That's a beautiful car man, I love the original fastbacks. Good luck with the sale!!
|
Good luck with the sale. I can't imagine it taking long to sell it's stunning! Have you put on autotrader classics?
|
Originally Posted by King
(Post 466315)
Good luck with the sale. I can't imagine it taking long to sell it's stunning! Have you put on autotrader classics?
It costs $50 to put it on the website for 4 weeks. Versus most charge that to have it on until it sells. I know its worth it, but I'm going to hold out until I think its necessary. |
All times are GMT -7. The time now is 06:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands