r3dn3ck

Just my regular clear out list. All prices are OBO, feel free to make stupid low offers... I usually only list stuff I don't want at all.

modular motor oil pump: should be a cobra pump but I can't be certain. Selling as a stock gt pump and if it's better, your good luck. 50 bones

Hypercoil 12"x375#x2.5" coil over springs. Brand new. May put them on with my 5.4 but if I can sell them I will. My existing 350's are pretty stout. on a coil over car these will ride pretty close to a H&R super sport or Race on a standard spring car. 125 + shipping.

Vortech 255LPH intank pump for 96-98. BRAND NEW. 125 shipped. (SOLD

5.4L 2v Front cover. Perfect shape. Comes with bolts. 125 + shipping.

5.4L 2v timing kit. Chains, tensioners, sprockets. No arms... they're too worn to feel good about. 50 bucks

NOS NOSzle kit: comes complete w/ window switch, WOT switch, FPSS, all wired up and ready to install with 2-3 simple connections. All connections are soldered or butt-connected cleanly. 2 sets of jets and pretty aluminum AN fittings. Bottle optional at extra shipping cost (find a bottle locally... save yourself the hassle). 675 bucks + shipping. Solenoids are near new.

1 driver side ported Windsor 2v head. It's mate was destroyed on a dyno run. I bought the GOOD head and threw the other away. Stock valvetrain, no cam. Flows 219int, 190ex according to the guy that ported them. I haven't benched them so I can't be sure. Ported by HCI. 200 bucks + shipping. Great for anyone worried about burning a head.

1 4.6L 2004 shortblock. Complete, 4k miles. Shortblock ready to run. I oil the cylinders and turn it over every couple weeks to keep rust from building. It will run perfectly...just bolt up to your heads and front cover. Pick up only, free to 00blkstang or any other SF Bay area resident and 1 particular Sacramento resident. 100 bucks to anyone else. NO SHIPPING PERIOD UNLESS YOU ARRANGE IT ALL.

1 5.4L block and crank. They're trashed but it's a good mock-up motor. I used it for that. The crank's #7 journal is scored .1" deep or more, #7 cylinder has a .2" deep gouge in it at the very bottom. Standard bore, a little ovaled. 190K miles. Free, PICKUP ONLY PERIOD.

1ea R & L Rear upper cradle mounts for 99-04 IRS. If you EVER want to do an IRS conversion you need these. They're hard to find and dealers charge between 20 bucks and 120 bucks (yeah... no two are the same price either) for them and they have been having problems finding them now that SN95's are out of production and these were only ever on SVT cars with IRS.
I used them while I had IRS on my car. Now that I'm back to live axle I don't need or want them. 50 bucks shipped.

Wanted or willing to trade for:
most anything really... bumpsteer kit, sway bars, diffs, gauges, seats, 255LPH fuel pump for 99-04 (only... no 96-98 pumps...I WILL burn those up), AFS wheel center caps (complete set of 4 only). I'm specifically looking for the fuel pump, and braided -8 hose or fittings, and poly 96-04 motor mounts.

r3dn3ck

BTW... if you can demonstrate a good cause, most of these things are available to my brothers in need for shipping costs only. This offer applies to people with BROKEN CARS. If your car runs without the part you want, then you pay like everyone else. Basically the offer is that if you need a part to use your car and I have it and you can't afford it (all conditions have to apply to you), then I'll give you the part for free and you just pay the actual shipping costs.

Last condition of this part of the offer is that you must have an average of 1 post per day or more on this board to even be considered. Sorry.. but you lurkers and trolls don't get the deals. Only my bros and hoes that be postin' regular like.

ChrisGT

awesome deals, expecially that shortblock. wish I was closer.

SnTBakosFinest

Might have to look into that NOSzle kit.. it'll go on for a v6 as well right?

r3dn3ck

yeah... you just have to block off 4 ports on the distribution blocks... super simple to do.

v6'stang

hey man that's really cool of you to do that. show's integrity. idk many ppl if any that would make that off especially to ppl they've never met before.

__________________
Mods:
17x9 black cobra wheels, BBK CAI, tru dual flowmasters, sct 4bank elim. chip, motive 3.73's, frpp t-lok.


...and the list grows.

r3dn3ck

ttt

laptop sold.

00blkstanggt

I just might be interested in that 4.6L shortblock. It would be nice to have only 4k miles since I have like 97k now. So all I really need to do is throw some heads on there and use the timing cover and I'm good to go. I'll let you know for sure soon if I want to come take that off your hands.

__________________
Sound clip of my car
http://www.youtube.com/watch?v=w-MhgSI-owQ

Blitzmann

If you still have the 2v timing kit next week I'll take it off your hands. I have all the major components for the 5.4 just seeking out the little stuff now.

jeredan2003

I want the oil pump......if its a cobra. How can you tell??

__________________
2003 DSG GT 5-speed
Hellion 62mm and Flowmaster catback.....

My bonestock 2v engine had been through 2 years of NX 100 shot, 3 years running 8-12lbs vortech s-trim, got into boost daily while racing on the weekends, had 157,000 miles on it, and was running like new

r3dn3ck

dunno... see if you can find me a casting number or something to look for.

russ... yep.. it's all yours. Come on over some time and check it out. The garage is open... motor in front in the middle. If you want it, you can take it anytime... use the cherry picker on the side of the garage to load it and leave a note.

Blitz: sure, LMK when you're ready.

Blitzmann

Looks like I'm going to need the front cover as well. What kind of deal can you cut me on the front cover and all the timing kit parts? Shoot me a pm when you get a chance.

r3dn3ck

make me an offer bud. If you can do something in 3 digits plus shipping I'll send you a BUNCH of stuff... even stuff I don't have listed. My boys on MB get crazy insane deals as you all know... so don't be afraid. Make a offer that makes it worthwhile to put it all in a box.


Now... someone needs to buy my NOSzle kit. THe thing is badass but I've already got another system. It hooks up with like 3 connections. Make an offer.

Blitzmann

Will that NOSzle kit work with the 5.4 setup? Whats the biggest shot it can spray?

Was planning on running NOS on the 5.4 with the built bottom end, and I'm all for supporting another 5.4 guy especially since you are basically the man to see for the project!

I'll shoot you a PM tonight or tomorrow morning with a price for the NOS kit and the 5.4 stuff you have.