FOR SALE: All my nitrous stuff!

*03gtmustang* · 11-23-2006, 05:03 PM

Ive decided to go a different route with my car, so Im getting rid of all my nitrous stuff. All of this stuff has been on my car for about a year and 8 months. Everything was bought BRAND NEW! During that whole time, Ive sprayed my car about 10 times on the dyno, and only 4 times at the track. So less then 15 times total.

This is the most complete used kit youll find. You wont need anything else for the install except a focus pump, but thats up to you. You CAN run a 100 shot with the stock pump, but I suggest upgrading.

Most of the kit is still on my car, however, I should have it off within the next couple days. Once I get everything off, it will be boxed up in the original boxes just as if you were to order it new from NX.

Whats Included and Individual Prices
NX EFI Single nozzle kit- $400 plus shipping
NX GenX2 kit- $300 plus shipping
Auto Meter C2 series nitrous pressure gauge- $170 plus shipping (or trade for Auto Meter C2 series boost gauge)
MSD Digital window switch (P/N 8969)- $70 plus shipping
NX Fuel block (needed for 03 1/2 and up cars)- $40 plus shipping

New this will cost you over $1350 from Summit, not including shipping. For everything, Im asking $950 shipped. I will add pictures of everything as I take it off the car.

*The only thing I dont have are the 75 shot jets. But you can order them from nitrousoutlet.com for $10 plus shipping. They are #.041 (nitrous) and .024 (fuel).

Here is my write up of the install when I was putting all of this stuff on the car. http://www.dndgarage.net/nxinstall.htm

10lbs bottle with brackets, bottle heater, blow down tube, nitrous line from nitrous solenoid to nozzle.

http://www.mustangmods.com/ims/u/1301/2081/121776.jpg

Close up of bottle with Auto meter sending unit, bottle nipple, bottle nut, relief device, rupture disk, pressure transducer, and bottle heater relay.

http://www.mustangmods.com/ims/u/1301/2081/121777.jpg

Just to clear some things up, the ONLY things I will sell separately are the things I listed above. the EFI kit, Genx2 kit, gauge, window switch, and fuel block. I will NOT part out anything more then that. So please dont ask me for the bottle heater itself, or a FPSS.

CCM · 11-23-2006, 08:53 PM

Does this alternate route include FI?

Blk02stang · 11-23-2006, 09:08 PM

I might be interested in the Fuel Block for putting the wet kit i have on my '04. No shipping would be needed either.

*03gtmustang* · 11-23-2006, 09:38 PM

Quote:

Originally Posted by CCM

Does this alternate route include FI?

Quote:

Originally Posted by Blk02stang

I might be interested in the Fuel Block for putting the wet kit i have on my '04. No shipping would be needed either.

Sounds good. $40 and gotta pick it up before Sunday.

Blk02stang · 11-23-2006, 09:39 PM

SOLD!!! lol i'll be up your way on Saturday meetin CCM anyway.

*03gtmustang* · 11-25-2006, 03:14 PM

More pictures....

Nitrous solenoid, purge solenoid, fuel solenoid, FPSS.
http://www.mustangmods.com/ims/u/1301/2081/122148.jpg

Jets, WOT switch, solenoid mount, random screws.
http://www.mustangmods.com/ims/u/1301/2081/122149.jpg

Both fuel lines and an extra 3 ft. nitrous line (Ill also include the shorter 2 ft. line). I got that because I needed a longer line to attach the nitrous solenoid to the nozzle. This will also help with any lean spike problems.
http://www.mustangmods.com/ims/u/1301/2081/122150.jpg

Bottle heater, blow down tube, extra purge hose, solenoid relay.
http://www.mustangmods.com/ims/u/1301/2081/122152.jpg

*03gtmustang* · 11-25-2006, 08:36 PM

One more picture, this should be everything...

Nitrous supply line, Auto meter C2 series nitrous pressure gauge with sender and mounting hardware, all three switches, bottle heater relay, and some extra wire.
http://www.mustangmods.com/ims/u/1301/2081/122214.jpg

*03gtmustang* · 11-25-2006, 10:18 PM

Alright, now to get everything straightened out. Heres whats included in each kit, and whats missing. Keep in mind all of this stuff is used, but everything was bought brand new by me.

NX Ford EFI Single Nozzle Kit
What I have
10lbs NX bottle
Bottle brackets
Bottle nipple
Bottle nut
(2) N20 feed line
N20 solenoid
Fuel solenoid
Shark nozzle
N20 line
Fuel line
Main fuel line
1 solenoid bracket
WOT switch with screws
Relay and wiring harness
All fittings
Switch
Pressure release fitting and rupture disk
Thread sealer
Random hardware
35, 50, 100, 150 shot jets

Things Im missing
75 shot jets
I dont believe I have the fitting that goes into the schrader valve
Nozzle adapter which is what you use to screw the nozzle into the inlet tube. However, its better to use a C&L inlet pipe (or something similar) and tape the inlet tube for the nozzle. Thats what I did.
Other then that you might need some extra wire, some random screws and another solenoid mount. But it really depends on how you install the kit.

Heres a picture of the EFI kit,
http://www.mustangmods.com/ims/u/1301/2081/122234.jpg
http://www.mustangmods.com/ims/u/1301/2081/122233.jpg

NX Gen X2 Kit
What I have
Bottle heater
Pressure transducer
FPSS
Blow down tube
Relay and wire harness
Switches
Extra wire

Things Im missing
Liquid filled N20 gauge
Pressure release fitting- This is the thing you screw the blow down tube onto. I had to leave this on the bottle.

Heres a picture of the Gen X2 kit,
http://www.mustangmods.com/ims/u/1301/2081/122232.jpg
http://www.mustangmods.com/ims/u/1301/2081/122230.jpg
http://www.mustangmods.com/ims/u/1301/2081/122231.jpg

*03gtmustang* · 12-05-2006, 02:05 PM

bump...

*03gtmustang* · 12-08-2006, 09:15 PM

fuel block is no longer for sale. Im going to keep it so I can keep my fuel gauge hooked up.

*03gtmustang* · 12-13-2006, 07:33 PM

Alright guys, Im feeling generous and I dont feel like bringing this stuff back home with me for winter break, so Im going to offer a good deal on everything starting now until Friday @ 12:00am.

NX EFI Single nozzle kit- $370 plus shipping
NX GenX2 kit- $280 SHIPPED
Auto Meter C2 series nitrous pressure gauge- $160 SHIPPED

Or buy everything for $800 plus shipping for the EFI kit ONLY. Buyer pays for paypal fees also. So through paypal thats $825 PLUS whatever shipping is for the EFI kit. Otherwise, you can send me a money order and itll be cheaper.

*03gtmustang* · 12-14-2006, 04:18 PM

Ive held onto the window switch because Im not 100% sure its working right. However, it might be just fine. It worked during my first dyno tune, but awhile later during my next tune it wasnt working right. I never sprayed between then. After the last tune I rewired it, but havent gotten a chance to test it out enough to guarantee its working 100%.

So I contacted MSD about it and they told me to send it in. All you need to do is get an RMA number and send it in. The estimate for repair is $11.50 - $36.80 (plus shipping and handling). So Ill let the window switch go for $40 shipped. Or FREE if you buy everything else.

*03gtmustang* · 12-18-2006, 12:56 PM

still have everything!

*03gtmustang* · 12-30-2006, 11:08 PM

Gauge, window switch, and Gen X2 is sold. Only have the EFI kit left.

*03gtmustang* · 01-04-2007, 09:51 PM

Bump!

spike_africa · 01-05-2007, 06:37 AM

show greg he wants a kit and get him to buy it.

ShapeShifter · 01-22-2007, 05:04 AM

still got everything?...you have a PM also!

*03gtmustang* · 01-22-2007, 05:46 AM

Everything is sold.

11-23-2006, 05:03 PM	#1 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	FOR SALE: All my nitrous stuff! Ive decided to go a different route with my car, so Im getting rid of all my nitrous stuff. All of this stuff has been on my car for about a year and 8 months. Everything was bought BRAND NEW! During that whole time, Ive sprayed my car about 10 times on the dyno, and only 4 times at the track. So less then 15 times total. This is the most complete used kit youll find. You wont need anything else for the install except a focus pump, but thats up to you. You CAN run a 100 shot with the stock pump, but I suggest upgrading. Most of the kit is still on my car, however, I should have it off within the next couple days. Once I get everything off, it will be boxed up in the original boxes just as if you were to order it new from NX. Whats Included and Individual Prices NX EFI Single nozzle kit- $400 plus shipping NX GenX2 kit- $300 plus shipping Auto Meter C2 series nitrous pressure gauge- $170 plus shipping (or trade for Auto Meter C2 series boost gauge) MSD Digital window switch (P/N 8969)- $70 plus shipping NX Fuel block (needed for 03 1/2 and up cars)- $40 plus shipping New this will cost you over $1350 from Summit, not including shipping. For everything, Im asking $950 shipped. I will add pictures of everything as I take it off the car. *The only thing I dont have are the 75 shot jets. But you can order them from nitrousoutlet.com for $10 plus shipping. They are #.041 (nitrous) and .024 (fuel). Here is my write up of the install when I was putting all of this stuff on the car. http://www.dndgarage.net/nxinstall.htm 10lbs bottle with brackets, bottle heater, blow down tube, nitrous line from nitrous solenoid to nozzle. http://www.mustangmods.com/ims/u/1301/2081/121776.jpg Close up of bottle with Auto meter sending unit, bottle nipple, bottle nut, relief device, rupture disk, pressure transducer, and bottle heater relay. http://www.mustangmods.com/ims/u/1301/2081/121777.jpg Just to clear some things up, the ONLY things I will sell separately are the things I listed above. the EFI kit, Genx2 kit, gauge, window switch, and fuel block. I will NOT part out anything more then that. So please dont ask me for the bottle heater itself, or a FPSS. __________________ D&D Auto Detailing -Dan

11-23-2006, 08:53 PM	#2 (permalink)
CCM Senior Member Join Date: Dec 2005 Location: Northern Virginia Posts: 1,382	Does this alternate route include FI? __________________ 2001 MINERAL GRAY GT (5-speed) H&R SuperSports MM 4-Bolt CC Plates Stoptech SS Brake Lines '03 Cobra Brakes Spec Billet Steel Flywheel Spec Stage 2 Clutch FRPP 4.10s X-Calibrator 2 Full Length Subframes Corbeau Legacy Racing Seats 18" Gunmetal Saleen Rims w/ Nitto 555s

11-23-2006, 09:08 PM	#3 (permalink)
Blk02stang I 8urvtec!! Join Date: Mar 2005 Location: Va Posts: 815	I might be interested in the Fuel Block for putting the wet kit i have on my '04. No shipping would be needed either. __________________ New toys '07 F-150 black on black and completely blacked out! '96 Mitsu eclipse RS: 'jus your average 2nd gen with a small block 331c.i. and a few bolt-on goodies(175shot) and rwd...1st one to be done! SOLD 2004 GT Annv. edition. Custom Exhaust: o/r X pipe: Eibach Sportline full suspension: Clutchmasters stage 4 clutch: K&N filter: Steeda Tri-ax shifter: Mach 1 shift knob: BFG Drag radials: Compucar "nitrous-n-a-bag" 80-shot Stage I, Compucar Wet kit 125shot stage II

11-23-2006, 09:39 PM	#5 (permalink)
Blk02stang I 8urvtec!! Join Date: Mar 2005 Location: Va Posts: 815	SOLD!!! lol i'll be up your way on Saturday meetin CCM anyway. __________________ New toys '07 F-150 black on black and completely blacked out! '96 Mitsu eclipse RS: 'jus your average 2nd gen with a small block 331c.i. and a few bolt-on goodies(175shot) and rwd...1st one to be done! SOLD 2004 GT Annv. edition. Custom Exhaust: o/r X pipe: Eibach Sportline full suspension: Clutchmasters stage 4 clutch: K&N filter: Steeda Tri-ax shifter: Mach 1 shift knob: BFG Drag radials: Compucar "nitrous-n-a-bag" 80-shot Stage I, Compucar Wet kit 125shot stage II

11-25-2006, 03:14 PM	#6 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	More pictures.... Nitrous solenoid, purge solenoid, fuel solenoid, FPSS. http://www.mustangmods.com/ims/u/1301/2081/122148.jpg Jets, WOT switch, solenoid mount, random screws. http://www.mustangmods.com/ims/u/1301/2081/122149.jpg Both fuel lines and an extra 3 ft. nitrous line (Ill also include the shorter 2 ft. line). I got that because I needed a longer line to attach the nitrous solenoid to the nozzle. This will also help with any lean spike problems. http://www.mustangmods.com/ims/u/1301/2081/122150.jpg Bottle heater, blow down tube, extra purge hose, solenoid relay. http://www.mustangmods.com/ims/u/1301/2081/122152.jpg __________________ D&D Auto Detailing -Dan

11-25-2006, 08:36 PM	#7 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	One more picture, this should be everything... Nitrous supply line, Auto meter C2 series nitrous pressure gauge with sender and mounting hardware, all three switches, bottle heater relay, and some extra wire. http://www.mustangmods.com/ims/u/1301/2081/122214.jpg __________________ D&D Auto Detailing -Dan

11-25-2006, 10:18 PM	#8 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	Alright, now to get everything straightened out. Heres whats included in each kit, and whats missing. Keep in mind all of this stuff is used, but everything was bought brand new by me. NX Ford EFI Single Nozzle Kit What I have 10lbs NX bottle Bottle brackets Bottle nipple Bottle nut (2) N20 feed line N20 solenoid Fuel solenoid Shark nozzle N20 line Fuel line Main fuel line 1 solenoid bracket WOT switch with screws Relay and wiring harness All fittings Switch Pressure release fitting and rupture disk Thread sealer Random hardware 35, 50, 100, 150 shot jets Things Im missing 75 shot jets I dont believe I have the fitting that goes into the schrader valve Nozzle adapter which is what you use to screw the nozzle into the inlet tube. However, its better to use a C&L inlet pipe (or something similar) and tape the inlet tube for the nozzle. Thats what I did. Other then that you might need some extra wire, some random screws and another solenoid mount. But it really depends on how you install the kit. Heres a picture of the EFI kit, http://www.mustangmods.com/ims/u/1301/2081/122234.jpg http://www.mustangmods.com/ims/u/1301/2081/122233.jpg NX Gen X2 Kit What I have Bottle heater Pressure transducer FPSS Blow down tube Relay and wire harness Switches Extra wire Things Im missing Liquid filled N20 gauge Pressure release fitting- This is the thing you screw the blow down tube onto. I had to leave this on the bottle. Heres a picture of the Gen X2 kit, http://www.mustangmods.com/ims/u/1301/2081/122232.jpg http://www.mustangmods.com/ims/u/1301/2081/122230.jpg http://www.mustangmods.com/ims/u/1301/2081/122231.jpg __________________ D&D Auto Detailing -Dan

12-05-2006, 02:05 PM	#9 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	bump... __________________ D&D Auto Detailing -Dan

12-08-2006, 09:15 PM	#10 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	fuel block is no longer for sale. Im going to keep it so I can keep my fuel gauge hooked up. __________________ D&D Auto Detailing -Dan

12-13-2006, 07:33 PM	#11 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	Alright guys, Im feeling generous and I dont feel like bringing this stuff back home with me for winter break, so Im going to offer a good deal on everything starting now until Friday @ 12:00am. NX EFI Single nozzle kit- $370 plus shipping NX GenX2 kit- $280 SHIPPED Auto Meter C2 series nitrous pressure gauge- $160 SHIPPED Or buy everything for $800 plus shipping for the EFI kit ONLY. Buyer pays for paypal fees also. So through paypal thats $825 PLUS whatever shipping is for the EFI kit. Otherwise, you can send me a money order and itll be cheaper. __________________ D&D Auto Detailing -Dan

12-14-2006, 04:18 PM	#12 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	Ive held onto the window switch because Im not 100% sure its working right. However, it might be just fine. It worked during my first dyno tune, but awhile later during my next tune it wasnt working right. I never sprayed between then. After the last tune I rewired it, but havent gotten a chance to test it out enough to guarantee its working 100%. So I contacted MSD about it and they told me to send it in. All you need to do is get an RMA number and send it in. The estimate for repair is $11.50 - $36.80 (plus shipping and handling). So Ill let the window switch go for $40 shipped. Or FREE if you buy everything else. __________________ D&D Auto Detailing -Dan

12-18-2006, 12:56 PM	#13 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	still have everything! __________________ D&D Auto Detailing -Dan

12-30-2006, 11:08 PM	#14 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	Gauge, window switch, and Gen X2 is sold. Only have the EFI kit left. __________________ D&D Auto Detailing -Dan

01-04-2007, 09:51 PM	#15 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	Bump! __________________ D&D Auto Detailing -Dan

01-05-2007, 06:37 AM	#16 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,426	show greg he wants a kit and get him to buy it. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

01-22-2007, 05:04 AM	#17 (permalink)
ShapeShifter Senior Member Join Date: May 2006 Posts: 509	still got everything?...you have a PM also! __________________

01-22-2007, 05:46 AM	#18 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,247	Everything is sold. __________________ D&D Auto Detailing -Dan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got pool?	rebelyell	Pictures	24	05-01-2006 11:34 PM
98 hood	BlitzStyrke	The Parts Desk	4	02-27-2006 03:15 PM
1994 Mustang Exhaust	Bimper	5.0L Tech	0	02-12-2006 01:34 PM
Ya or nay?	FritoBandito	The Lounge	15	12-23-2005 04:57 PM
google.com	i love soccermoms	The Lounge	8	11-12-2005 11:09 PM