B&M Electronic Shift Kit

fiystydog · 12-09-2004, 11:28 AM

I have a 1996 laser red gt, its my baby but its an automatic... **** im not ashamed at all, but I am looking around to get her to shift a little firmer. I reserched the B&M kit that requires you to drill in ur valve body i think it was... but its not a freakin pro dragster... i would jsut like a firmer shift to get rid of the lag between 1st and 2nd... does anyone know about the B&M electronic shift kit?

Chopper · 12-09-2004, 11:36 AM

I'm not familiar with that particular kit,but an add on chip will move your shift points higher and make them firmer.Look around,there are handheld tuners and piggyback chips.Don't just get a generic chip,get one that can be reburned by a tuner with a dyno for best results.

fiystydog · 12-09-2004, 11:45 AM

thanks man... im not to fimiliar with chips at all really... i have a buddy who is running a venom chip.. not on a mustang but he says he can tell a difference.. ive looked around at the Diablos... but I have heard alot of negativity.. the B&M kit is suposed to recalibrate your hydrolic system to increase shift power and its controled by an on off swith to run performance or stock.. sounds coola dn there is even an additive formula by B&M guys that foams to help your hydrolics that im using and it works! for anyone interested

but if anyone has used these products or knows anything about them pleae let me know

spike_africa · 12-09-2004, 05:49 PM

I cant stress enough how bad it is to use these things, if you want firmer shifts use a shift kit like the transgo or the "jerry mod" i have used transgo in all my automic transmission equpied cars and truck and added coolers to them to and they all last a long time.

The electric shift improvers and chips with line pressure raised up will make the front pump work harder and wear it out faster. i dont recomend this to anyone at all.

Chopper · 12-10-2004, 08:47 AM

I had a chip only in my MK VIII for 167,000 mi with no trouble (untill it flipped out,the chip,not the car) The transmission gave me no trouble at all,even with hard launches and full throttle shifts.Although I have heard of damage when an auto trans is held in first,second,and third to raise the shift points manually.

fiystydog · 12-10-2004, 03:33 PM

Thanks for all the imput guys... with im just kinda hesatant to drill... with installing the transgo kit or the B&N kit... does anyone know the cost of installation of the transgo or B&M kits? that was also an important factor ...

this new kit by B&M the electronic one.. also has the optional on off switch so you can run stock or performance... so that is good right? you can take it easy while normally driving.. then teach the little ricer something beside you

Chopper · 12-10-2004, 04:40 PM

Don't be afraid to use a drill.The proper bit comes with the kit(HA,a poet)and full instructions.The one thing I wonder about is,what if you get a chip and the tranny already has a shift kit installed?I guess you could tell the manufacturer and they could disable the transmission program?

spike_africa · 12-10-2004, 11:17 PM

Quote:

Originally Posted by Chopper

Don't be afraid to use a drill.The proper bit comes with the kit(HA,a poet)and full instructions.The one thing I wonder about is,what if you get a chip and the tranny already has a shift kit installed?I guess you could tell the manufacturer and they could disable the transmission program?

yuo would just tell them to not raise the line pressure. and dont be afriad of the transgo its very easy to install and comes with a video to help you along to. i have installed about 8 different transgo kits i like them and they they are well worth 100 bucks.

fiystydog · 12-11-2004, 10:38 AM

I know for a fact that my car dosnt have a kit already in it... im just wondering how much it cost to professionally install it though i will prob end up doin it myself... this would be my first time getting that deep in my car likeI installed all my parts so far but never messed witht hte drivetrain...ill take yall guys word for it.....next question transgo or B&M?

spike_africa · 12-11-2004, 12:12 PM

B&M kits suck they come with bad directions and no video, get the transgo, wacth the video, if you dont think you can after wacthig it pay someone to do it. it should cost about 200bucks installed so i have been told.

NoKturnaL · 12-11-2004, 12:35 PM

get a stick shift car and be dome with it.

spike_africa · 12-11-2004, 02:35 PM

Quote:

Originally Posted by V8 SyndicateZ

get a stick shift car and be dome with it.

Good idea

Islander03GT · 12-12-2004, 03:06 PM

Quote:

Originally Posted by V8 SyndicateZ

get a stick shift car and be dome with it.

Automatics are much more consistent at the strip (no missed shifts) can hold boost better, and are much easier to live with in traffic. It all comes down to personal preference in the end, and not everyone wants to row their own gears every day.

The B&M electronic kits are junk. I could make you a similar product for about 2 bucks at radio shack. I had one on my old Chevy S10. What it does is when you turn it "on" it tricks your computer into thinking its at WOT all the time, and the vehicle shifts accordingly. At WOT it adds no performance at all, and your car will feel like it shifts normal. Its great for towing, but not performance.

What I would do (and am doing) is the Jerry mod. Go to stangnet.com or modulardepot.com and search around for "Jerry Mod" and you'll get tons of info. This is basically a "do it yourself" shift kit utilizing a stock Ford valve body seperator designed by Jerry W, the man who designed the AOD and 4R70W for Ford. He knows his stuff. Print out the direcitons, buy the necessary parts and do it. I'd do a tranny cooler too while you're at it, nothing kills these things faster than heat.

12-09-2004, 11:28 AM	#1 (permalink)
fiystydog 96 mustang gt Join Date: Oct 2004 Location: Hickory Nc Posts: 6	B&M Electronic Shift Kit I have a 1996 laser red gt, its my baby but its an automatic... **** im not ashamed at all, but I am looking around to get her to shift a little firmer. I reserched the B&M kit that requires you to drill in ur valve body i think it was... but its not a freakin pro dragster... i would jsut like a firmer shift to get rid of the lag between 1st and 2nd... does anyone know about the B&M electronic shift kit?

12-09-2004, 11:36 AM	#2 (permalink)
Chopper Senior Member Join Date: Dec 2004 Location: Parkersburg Wv. Posts: 257	I'm not familiar with that particular kit,but an add on chip will move your shift points higher and make them firmer.Look around,there are handheld tuners and piggyback chips.Don't just get a generic chip,get one that can be reburned by a tuner with a dyno for best results. __________________ 04 Mustang GT M5,1200 H-D Sportster Street Legal Drag Bike.1942 Flathead Chopper.1960 Cessna 172.(yes it's been modded too) BUY AMERICAN!!!

12-09-2004, 11:45 AM	#3 (permalink)
fiystydog 96 mustang gt Join Date: Oct 2004 Location: Hickory Nc Posts: 6	thanks man thanks man... im not to fimiliar with chips at all really... i have a buddy who is running a venom chip.. not on a mustang but he says he can tell a difference.. ive looked around at the Diablos... but I have heard alot of negativity.. the B&M kit is suposed to recalibrate your hydrolic system to increase shift power and its controled by an on off swith to run performance or stock.. sounds coola dn there is even an additive formula by B&M guys that foams to help your hydrolics that im using and it works! for anyone interested but if anyone has used these products or knows anything about them pleae let me know

12-09-2004, 05:49 PM	#4 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,367	I cant stress enough how bad it is to use these things, if you want firmer shifts use a shift kit like the transgo or the "jerry mod" i have used transgo in all my automic transmission equpied cars and truck and added coolers to them to and they all last a long time. The electric shift improvers and chips with line pressure raised up will make the front pump work harder and wear it out faster. i dont recomend this to anyone at all. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

12-10-2004, 08:47 AM	#5 (permalink)
Chopper Senior Member Join Date: Dec 2004 Location: Parkersburg Wv. Posts: 257	I had a chip only in my MK VIII for 167,000 mi with no trouble (untill it flipped out,the chip,not the car) The transmission gave me no trouble at all,even with hard launches and full throttle shifts.Although I have heard of damage when an auto trans is held in first,second,and third to raise the shift points manually. __________________ 04 Mustang GT M5,1200 H-D Sportster Street Legal Drag Bike.1942 Flathead Chopper.1960 Cessna 172.(yes it's been modded too) BUY AMERICAN!!!

12-10-2004, 03:33 PM	#6 (permalink)
fiystydog 96 mustang gt Join Date: Oct 2004 Location: Hickory Nc Posts: 6	cost for a shift kit? installation Thanks for all the imput guys... with im just kinda hesatant to drill... with installing the transgo kit or the B&N kit... does anyone know the cost of installation of the transgo or B&M kits? that was also an important factor ... this new kit by B&M the electronic one.. also has the optional on off switch so you can run stock or performance... so that is good right? you can take it easy while normally driving.. then teach the little ricer something beside you

12-10-2004, 04:40 PM	#7 (permalink)
Chopper Senior Member Join Date: Dec 2004 Location: Parkersburg Wv. Posts: 257	Don't be afraid to use a drill.The proper bit comes with the kit(HA,a poet)and full instructions.The one thing I wonder about is,what if you get a chip and the tranny already has a shift kit installed?I guess you could tell the manufacturer and they could disable the transmission program? __________________ 04 Mustang GT M5,1200 H-D Sportster Street Legal Drag Bike.1942 Flathead Chopper.1960 Cessna 172.(yes it's been modded too) BUY AMERICAN!!!

12-11-2004, 10:38 AM	#9 (permalink)
fiystydog 96 mustang gt Join Date: Oct 2004 Location: Hickory Nc Posts: 6	transgo or B&M? I know for a fact that my car dosnt have a kit already in it... im just wondering how much it cost to professionally install it though i will prob end up doin it myself... this would be my first time getting that deep in my car likeI installed all my parts so far but never messed witht hte drivetrain...ill take yall guys word for it.....next question transgo or B&M?

12-11-2004, 12:12 PM	#10 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,367	B&M kits suck they come with bad directions and no video, get the transgo, wacth the video, if you dont think you can after wacthig it pay someone to do it. it should cost about 200bucks installed so i have been told. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

12-11-2004, 12:35 PM	#11 (permalink)
NoKturnaL MustangTuning 5-oh Join Date: Dec 2004 Location: Peabody, MA Posts: 1,950	get a stick shift car and be dome with it. __________________ 2002 Mustang GT Coupe 5-Speed Performance K&N Intake Accufab upper Intake Plenum Accufab 70mm Throttle Body Steeda Pullies SCT 4-Bank Chip Dyno Tuned Mac H-pipe Flowmaster Cat-Back Steeda Shifter Centerforce Clutch SLP-Line-Lock And more upgrades visually

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
the happiest day of my life!!!	G PURE 260 STANG T	The Lounge	22	02-25-2006 03:01 PM
YAY new motor installed in April	Stangdude27	The Lounge	0	01-08-2006 08:19 PM
guy talks a lot of ****	I hate fat girlz	Videos	6	12-27-2005 10:51 PM
Hi, from Huntsville, AL	kcomfort001	New Members!	7	07-08-2005 03:46 PM
"Smart Spark" Ignition Computer...Anyone???????	Matt95GTS	5.0L Tech	0	02-24-2005 10:52 AM