new heads

ponyexpress96 · 08-13-2005, 07:35 PM

a couple of you guys told me to get the 99+ heads and intake for my 96 GT and so i went looking around and i went to advance just to get there price so i could compare and not only were they $500 each for the heads but also he asked what type of valves oval or somthing else so which ones would i need and if there was a cheaper place to get them

*madmatt* · 08-14-2005, 06:22 AM

Look around on the net. Some places offer a PI kit for like 1200 bucks. Also, Ive seen the ads in MM&FF. Check the classifieds on all the sites. Theres usually a lot of PI heads floating around. Check Modulardepot from time to time and try to get a set of 01+ heads because they have bolt on cam gears.

MattJ · 08-14-2005, 06:32 AM

You can even goto the junkyard and steal the PI setup they have. Modular depot, EBAY, modular powerhouse, corral... those are all great places to find the PI upgrade parts for your vehicle.

ponyexpress96 · 08-14-2005, 07:27 AM

thanks and so is dose not matter what kind the valves are ? and alsowould need a PI cam as well

spike_africa · 08-14-2005, 09:12 AM

there is a guy on ebay who says PI head swap kits with intakes gaskets heads everything for liek 1,200 bucks. thats what i would do personally.

08-13-2005, 07:35 PM	#1 (permalink)
ponyexpress96 Senior Member Join Date: Jul 2005 Location: Concord, NC Posts: 113	new heads a couple of you guys told me to get the 99+ heads and intake for my 96 GT and so i went looking around and i went to advance just to get there price so i could compare and not only were they $500 each for the heads but also he asked what type of valves oval or somthing else so which ones would i need and if there was a cheaper place to get them __________________ 96 GT Bassani X-Pipe Flowmasters Under drive pullies Hurst Short Shifter BBK Cold Air Intake(Fender)

08-14-2005, 06:22 AM	#2 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,929	Look around on the net. Some places offer a PI kit for like 1200 bucks. Also, Ive seen the ads in MM&FF. Check the classifieds on all the sites. Theres usually a lot of PI heads floating around. Check Modulardepot from time to time and try to get a set of 01+ heads because they have bolt on cam gears. __________________ RPMPlanets

08-14-2005, 06:32 AM	#3 (permalink)
MattJ Senior Member Join Date: Dec 2004 Location: Racine, WI Posts: 10,243	You can even goto the junkyard and steal the PI setup they have. Modular depot, EBAY, modular powerhouse, corral... those are all great places to find the PI upgrade parts for your vehicle. __________________ 2001 Mustang GT Premium - Mineral Grey

08-14-2005, 07:27 AM	#4 (permalink)
ponyexpress96 Senior Member Join Date: Jul 2005 Location: Concord, NC Posts: 113	thanks and so is dose not matter what kind the valves are ? and alsowould need a PI cam as well __________________ 96 GT Bassani X-Pipe Flowmasters Under drive pullies Hurst Short Shifter BBK Cold Air Intake(Fender)

08-14-2005, 09:12 AM	#5 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,430	there is a guy on ebay who says PI head swap kits with intakes gaskets heads everything for liek 1,200 bucks. thats what i would do personally. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2005-2007 GT engine in a 99-04 body	Silver2kGT	Modular 4.6L Tech	11	10-05-2006 09:58 AM
Followed Slappy's Cheats:	rada	The Lounge	11	11-16-2005 03:50 PM
STOCK air intake	Smpf9	Wanted To Buy	2	09-13-2005 06:12 PM
Long tube headers	saleen50	Modular 4.6L Tech	2	09-07-2005 12:53 PM
17x9 chrome bullitt rims	bvdman	AmericanMuscle	1	08-20-2005 02:14 PM