Long tube header Motor mount help
I just installed longtube headers on my 2001 Mustang gt and they only have a .125-.25 clearance off the frame.The problem is when clutching out of 1st i sometimes hear a clunk..the drivers side header is hitting the frame not good. Im wondering if new engine mounts from AM will fix or must i try to bend or dent stainless headers .I cant dent or cut out the section where i think its hitting because its on a bolt support .My car makes about 390 hp with all the mods if that helps...........ANYONE that has had a simular problem or advice please help me figure this out...........THXxxxxx
|
go with soild motor mounts from arts parts. didn't make the ride any rougher
|
umm
Soo what your saying is a soild mount? ..... Thx
|
poly urethane will help, solid will fix it. You'll get a little more vibration but it's livable.
|
OK
Well id really rather not have the vibration, but it looks like im gonna haft to go with the solids, my headers are way to close to the frame. I dont want to take a chance on ripping them off out of the hole..
Thx guys |
Prices
CJS PONY wants $39.95 for solids but have no pic of them HMM, laural mountain mustang wants $63.00 with a pic lol.what to do what to do
|
What brand do you have by the way?
|
Motor mount
Neither of the carry a brand name... heres the links.......can someone give me some solid advice lol get it solid lol
1 http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT 2 http://www.cjponyparts.com/product.asp?pn=MM9604 |
Poly mounts help a ton. I'd suggest energy suspension mounts (better design). However, the ideal solution would be to mark the trouble spot on the header or body and use a BMF hammer to make the clearance. Applying heat also will help. Also, depending on the design (or luck), you may need to remove your headers whether you are banging or replacing mounts.
|
hmm
BASSMAN ...you didnt read all the post or you would see that i only have .125-.25 clearance and that polys wont work..thanks for an opinon but that didnt HELP OR MATTER . Im looking for serious help or advance advice....And were on a completely diffrent subject now.
|
Originally Posted by DREADSAW
(Post 448743)
BASSMAN ...you didnt read all the post or you would see that i only have .125-.25 clearance and that polys wont work..thanks for an opinon but that didnt HELP OR MATTER. Im looking for serious help or advance advice....And were on a completely diffrent subject now.
|
WOW
JUST BECASUE IM NEW DOESNT MEAN I DESERVE TO BE HARASSED ..ALL THE PREVIOUS POST WERE RIGHT ON THE MONEY UNTIL YOU AND YOUR BUDDY HAD A MISINFORMED OPINION ..Well he didnt read the previous post , he just chimed in with and had an educateded opinon and now you !..I wasnt THAT hard on him..but once again you didnt READ the prior post.HOW SAD YOU DIDNTUNDERSTAND KID < I THINK EVERYONE KNOWS WHO THE DICK IS!
|
Originally Posted by DREADSAW
(Post 448753)
ALL THE PREVIOUS POST WERE RIGHT ON THE MONEY UNTIL YOU AND YOUR BUDDY HAD A MISINFORMED OPINION ..Well he didnt read the previous post , he just chimed in with and had an educateded opinon and now you !..I wasnt THAT hard on him..but once again you didnt READ the prior post.HOW SAD YOU DIDNTUNDERSTAND KID < I THINK EVERYONE KNOWS WHO THE DICK IS!
Bassman actually contributes a lot to this forum. You however do not, yet you come in here like a hot steaming pile of shit and start to boss people around when they're the ones trying to help you. It's called respect, you should go down the Wal-Mart and buy some I heard its one sale this week. Then you can come back and talk with the rest of the grown-ups. Good day. |
awww
Your being looked into ,i wasent rude to him ..but you had to come in and throw your 2 cents in ..OUCH what a shame they are looking into you behavior...all i did was state the obvious.... i never dissrespected anyone but your outta line KID....
|
Originally Posted by DREADSAW
(Post 448764)
Your being looked into ,i wasent rude to him ..but you had to come in and throw your 2 cents in ..OUCH what a shame they are looking into you behavior...all i did was state the obvious.... i never dissrespected anyone but your outta line KID....
|
ouch
|
LOL
If i knew how to add a qoute ..lol id be able to post all the nasty things you said to me but its ok , admins are looking into you , just because im new doesnt mean i dont have a clue, or dissrespect anyone, Youve dissrepected me more then anything!..Im done wasting my time with a KID..You wanna think youve won then Ok your right and im stupid and you won lol.....
|
Before you completely say that I'm useless, how about I explain. I had headers, and I had on the passenger side only enough clearance to slide a few sheets of paper in-between the tubes and k-member. I never had a problem initially with the rubber mounts, then, when I did, I switched over to poly and that helped. Now, the problem with solid is it will cause more vibrations, especially if the engine is far from stock or old. It can be livable, or it can remind how many loose parts are on your car. That's why i said the best solution would be to dent the tubes. Mounts are just a patched job for the real problem. You may not want to remove the headers to do it but that's the best solution.
|
Dreadsaw... STFU. I'm admin, you're n00b and I ain't lookin' into shit. You jumped on bassmans's back like white on rice when he was being helpful. You'd better cool it kiddo.
Bassman is correct btw. Mounts are a treatment not a true solution. |
you could also put spacers 1/4" inbetween the k-member and body where they mount. this would give that much more clearence in there without changing anything else.
|
Originally Posted by DREADSAW
(Post 448770)
If i knew how to add a qoute ..lol id be able to post all the nasty things you said to me but its ok , admins are looking into you , just because im new doesnt mean i dont have a clue, or dissrespect anyone, Youve dissrepected me more then anything!..Im done wasting my time with a KID..You wanna think youve won then Ok your right and im stupid and you won lol.....
|
Originally Posted by myillwillinc
(Post 448835)
you could also put spacers 1/4" inbetween the k-member and body where they mount. this would give that much more clearence in there without changing anything else.
I'm still wondering what brand headers he has. |
I'm guessing they're not BBK, cuz if im not mistaken, they have that lil indention in them don't they? Maybe Pypes? I know they don't and i've heard of them having clearance issues like he's describing.
|
I wouldnt post anymore helpful info for this clown to read. Let him yell at other people on other forums.
|
I just want to know which ones are having this problem.
|
longtubes are hit and miss. even if you build them on a jig there's enough difference set to set to allow things like hitting the frame rail or tapping the steering shaft. This sort of shit is common and ALWAYS treated during or post install. That's the breaks.
I had to pound the floor up in my car to fit mine. |
All times are GMT -7. The time now is 12:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands