Vert_Lover

In the instructions I've seen it says to remove the shift knob off the shifter and then pull the entire console area out from the inside... I've wiggled it around and it's in there pretty good... what's the secret to getting that out?

madmatt

Hard to explain, but what I did was take the know off, and then use both hands and push in the center with my thumbs while I pulled out. Should pop right out but not too far because of the traction control wires and cig lighter. Good luck man, pretty easy after that. Just be careful setting the stops.

__________________

04 STANG

Once you take the ring off that is around the bottom of the shifter as well as the knob, you just put your fingers in and just pull. It should just come off easily. If yours is 2000 and newer that is all you have to do. Put your fingers around the shift boot and pull it off.

__________________
2004 Mustang GT

Stangdude27

Put the shift knob back on and pull it hard to the left or right you'll hear it pop and feel it.

dsg_gt2004

i think hes talkin about that console part that has the shift boot on it...but if you wanted help taking the actual shifter out, then listen to stangdude...other wise put ur hand where the boot and plastic meet and get that hand under that and pull up/

JIMB0

Man....i have got the perfect thing for you!

http://www.tradboy.com/gallery/steedashifter

...My buddies COMPLETE step by step instructions for the steeda tri ax.

__________________
2004 Dark Shadow Gray Mustang GT 5 Speed
Mac Off Road H-Pipe
Bassani Catback
Densecharger CAI
Motive Performance 3.90's
DM Speedo Recal

Soon to Come:
Tri-Ax

04SVTDRIVER

THAT'S THE EASY PART JUST PULL WHERE THE LEATHER MEETS PLASTIC I put a PRO 5.0 on my 94 and man was that thing a pain to get the old shifter off. Be sure not to mangle that rubber boot or it'll be loud. I ended up having to put my car on a lift and knock it out from the bottom

__________________
04 Screaming Yellow Cobra
Go Fast/Performance: Custom 3" Header back exhaust, Custom O/R X-Pipe, Steeda Highflow's, Steeda Triax (on the way), 95mm MAF, Cold Air Intake, Predator Programming, 2.8" Pulley (ON THE WAY)

Styling: Steeda shift knob, Blackout letter kit, tinted windows, Cobra grille insert