Mustang Boards - Camshaft/Spring question.

- Modular 4.6L Tech (https://mustangboards.com/modular-4-6l-tech/)

- - Camshaft/Spring question. (https://mustangboards.com/modular-4-6l-tech/27154-camshaft-spring-question.html)

blackbullitt5583

11-19-2007 11:00 AM

Camshaft/Spring question.

I have Crower Stage II cams with an advertised .559/.570 lift and my heads have Comp Beehive springs that are advertised to work with .550 lift cams. Will I be pushing my luck with these springs? I really don't want to change them out.

r3dn3ck

11-19-2007 12:36 PM

not pushing ... pushed past tense.

Change the springs for a set with at least .580 lift capacity. That'll do what you need and be big enough to handle a little variation in installed height.

FWIW... I have .550/.550 and .550 springs. I'm pushing it.

blownstang

11-19-2007 08:50 PM

go with Manley Nexteks

96TangerineBossGT

11-23-2007 12:08 PM

I was told that the comp beehives would work with VT Stage IIs that have slightly greater lift than the cams you have, but I just didn't trust it and went with the crower springs. No problems...

Scott

JROC02

12-04-2007 03:29 PM

Let me know how the cams are, I'm thinking of getting those cams! thanks!

B-rett

12-04-2007 03:32 PM

Quote:

Originally Posted by 96TangerineBossGT (Post 292912)

I run this set up, the ppl at VT and comp told me i would be fine and that comp greatly underrates their springs

All times are GMT -7. The time now is 08:48 AM.