litle help tunin'
#1
litle help tunin'
Hi, well new around this board, so basicly i have a mustang 2002 GT stock, so i want install many parts to make some performance.
u guys are the expert's so advice how to make a nice setup for my stang.
not the best, but nicely...
normal use and just sometimes race..not always...
===================
i see one stang like mine and have something like this:
*Ford Racing Shorty Headers
*BBK Off Road X-Pipe (no cats)
*Imco Performance Mufflers
*Ford Racing 3:73 Rear Diff. Gear (all synthetic oils)
*75mm BBK Throttle Body
*BBK Cold Air Intake
*BBK Pulley Set
===================
btw i see some turbocharger.... K27 or T70 Stage 4....
yes, i want install it, somehow witch one its better or another..
what i need do before install a turbocharger, i want know all... u.u please help me to help others.
its that okai? or just noob stuff?
u guys are the expert's so advice how to make a nice setup for my stang.
not the best, but nicely...
normal use and just sometimes race..not always...
===================
i see one stang like mine and have something like this:
*Ford Racing Shorty Headers
*BBK Off Road X-Pipe (no cats)
*Imco Performance Mufflers
*Ford Racing 3:73 Rear Diff. Gear (all synthetic oils)
*75mm BBK Throttle Body
*BBK Cold Air Intake
*BBK Pulley Set
===================
btw i see some turbocharger.... K27 or T70 Stage 4....
yes, i want install it, somehow witch one its better or another..
what i need do before install a turbocharger, i want know all... u.u please help me to help others.
its that okai? or just noob stuff?
#3
okai... the car is stock...
i going to spend around 1.5k-2k at last.
power, well just all wat i can get.. with that money. and well make the engine and transmision last a bit long. ... i need make some mod i think to support turbocharger.
i going to spend around 1.5k-2k at last.
power, well just all wat i can get.. with that money. and well make the engine and transmision last a bit long. ... i need make some mod i think to support turbocharger.
#4
Mustang V6 & V8 Stock Details
V6
GT
Configuration 90-degree V6 90-degree V8
Displacement 3.8 liters/232 cu. in. 4.6 liters/280 cu. in.
Horsepower 190 @ 5250 rpm 260 @ 5250 rpm
Torque 220 lb.-ft. @ 2750 rpm 302 lb.-ft. @ 4000 rpm
V6
GT
Configuration 90-degree V6 90-degree V8
Displacement 3.8 liters/232 cu. in. 4.6 liters/280 cu. in.
Horsepower 190 @ 5250 rpm 260 @ 5250 rpm
Torque 220 lb.-ft. @ 2750 rpm 302 lb.-ft. @ 4000 rpm
#6
i thought the 8's were 281ci?
#7
check :
vehicle specs http://www.miracerros.com/mustang/2000_specs.html
and well many other tips for mustang v6. http://www.miracerros.com/mustang/
i was looking for my v8 but well found for v6, good as well .. maybe cool for u cuz u have V6
vehicle specs http://www.miracerros.com/mustang/2000_specs.html
and well many other tips for mustang v6. http://www.miracerros.com/mustang/
i was looking for my v8 but well found for v6, good as well .. maybe cool for u cuz u have V6
#10
okai, please ... thanks.. i learn a lot here
i was thinking buy SCT Livewire.
NEW PRIORITY LIST:
i was thinking buy SCT Livewire.
NEW PRIORITY LIST:
Code:
OEM headers are bad? cuz i want change the header latter... at last this is top priority: 1. BBK 75mm TB 2. JLT or BBK Cold Air Intake 4. UPR w Cats Exhaust X pipe. 5. Pulley Underdrive 6. SCT Livewire - " here im going to tell american muscle i have those mods " - then im going to spend some more for like: 7. UPR/BBK or other brand Headers 8. Other Stuff.. - " send back SCT and tell about new mods or wutever and again " - i dont know if my list is wrong... i have new ask's: i my list okai or need change priority, tell me and ... i can use that stuff without the tunner and wait 1 or 2 weeks then use the tunner? or I CANT and need wait the SCT tunner before use all. Thanks..
Thread
Thread Starter
Forum
Replies
Last Post
trickedoutstangg
The Lounge
13
06-30-2005 09:51 PM