Mustang Forums

Go Back   Mustang Forums > Mustang Madness > Modular 4.6L Tech

Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Reply
 
Thread Tools Display Modes
Old 04-24-2005, 12:10 PM   #1 (permalink)
brucespot
Senior Member
 
brucespot's Avatar
 
Join Date: Apr 2005
Posts: 124
Default What will my rpm be in 5th.with 4.10s

And also what will my rpms be in 5th gear @ 65 miles per hour? I hope I will not regret this gear change. 2004 mustang GT 5 speed.
Attached Images
File Type: jpg 1.jpg (59.6 KB, 145 views)
brucespot is offline   Reply With Quote
Old 04-24-2005, 02:45 PM   #2 (permalink)
thundergod
Senior Member
 
Join Date: Apr 2005
Posts: 116
Default

I just put 4.10's in my 2002 with auto and im around 2500 at 65 miles per hour 3000 at 75mph. i dont think it would be much different with the 5 speed. as far as et i haven't made to the track yet so i cant help with that one. I do know it take some getting used to launching im on stock size falkens but it feels like another engine because your in the power curve quicker. unless you do alot of hiway driving you will not regret the choice. dont forget to recalibrate your speedometer.
thundergod is offline   Reply With Quote
Old 04-25-2005, 03:10 PM   #3 (permalink)
02wt5sp
rice..it'swhat'sfordinner
 
02wt5sp's Avatar
 
Join Date: Sep 2004
Location: hampton va
Posts: 324
Default

Your RPM will be at 2162.7 at 65mph with 4:10's. I'll have mine installed in a few weeks. My last one was a 98 GT w4:10's and I was closer to 2700 rpm's at 70(because the final drive on a T-45 is .67 or .68(can't remember) and a 3650 is .62) and it was still not bad to drive, even on the hwy. You won't regret it at all. BTW if you look in the how-to forum there is a gear calculator.
__________________
NO MORE GT!!! UPGRADED TO COBRA!!!
Mods: magnaflow catback, JLT CAI
bone stock dyno #'s 372rwhp and 364rwtq
02wt5sp is offline   Reply With Quote
Old 04-25-2005, 07:40 PM   #4 (permalink)
silvergt
Speed Racer
 
silvergt's Avatar
 
Join Date: Apr 2005
Posts: 203
Default

last week i put 4.10s in my auto and after getting used to the change i dont regret it at all, the performance gain is huge. You will definitely notice the higher rpms on the highway, i know it will be different in your 5 speed but my rpms are 3000 at 70-75mph.
silvergt is offline   Reply With Quote
Old 04-26-2005, 05:52 PM   #5 (permalink)
buddyabe
SILVER 01 GT CONVERT AUTO
 
Join Date: Jan 2005
Location: coon rapids mn. u.s.a.
Posts: 205
Default

the 5 speed will run lower rpms than the auto. I installed 4.10 gears in my 01 auto and it runs 76 miles per hour at 3000 rpms,the same gears in a 02 5speed will be at 90 miles per hour in 5th at 3000 rpms
buddyabe is offline   Reply With Quote
Old 04-26-2005, 06:41 PM   #6 (permalink)
WaterDR
Administrator
 
Join Date: Sep 2004
Posts: 6,370
Default

Quote:
Originally Posted by buddyabe
the 5 speed will run lower rpms than the auto. I installed 4.10 gears in my 01 auto and it runs 76 miles per hour at 3000 rpms,the same gears in a 02 5speed will be at 90 miles per hour in 5th at 3000 rpms
I don't think that is right. I run 75 miles per hour in 5th at about 2800 rpms and I am perfectly calibrated.
__________________


Black 2000 GT Vert:
Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump

My Car

My Email
WaterDR is online now   Reply With Quote
Old 04-26-2005, 06:49 PM   #7 (permalink)
buddyabe
SILVER 01 GT CONVERT AUTO
 
Join Date: Jan 2005
Location: coon rapids mn. u.s.a.
Posts: 205
Default

Your 2000 with 5 speed will run higher rpms in 5th than a 2001.5 and newer 5 speed. Try bringing your engine rpms up 200 more rpms to a even 3000 and see what speed your at. I have a perfectly calibrated speedo and I find it to read pretty close to the chart that the gear calculator has in our how to forum.
buddyabe is offline   Reply With Quote
Old 04-26-2005, 07:15 PM   #8 (permalink)
TonyStangs
Mustang Guru
 
TonyStangs's Avatar
 
Join Date: Feb 2005
Location: New York
Posts: 272
Send a message via AIM to TonyStangs Send a message via MSN to TonyStangs
Default

so if i put 4.10's on my 02 gt 5 speed then my highway driving shouldnt be hurt too much. i want more power however i go on the highway numerous times daily.
__________________
--__-- My 2002 Mustang GT --__--
- Urethane Cobra R Front Bumper
- K&N Air Charger Intake
- Mach 1 Grille Delete and Lip Spoiler (Painted To Match)
- Side View Mirrors (Painted To Match)
- 18x9/18x10 Chrome Saleen Wheels w/ Nitto Tires
- Brembo Drilled/Slotted Rotors
- Steeda Tri-Ax Short Shifter
- Brake Calipers (Painted To Match)
- Eibach Pro-Kit Springs
- Tokico Struts/Shocks
- Magnaflow Magnapack Cat-Back
- MAC Off-Road H-Pipe
- SCT Superchips XCaliber Tuner
TonyStangs is offline   Reply With Quote
Old 04-26-2005, 11:54 PM   #9 (permalink)
rebelyell
unofficial philosopher
 
rebelyell's Avatar
 
Join Date: Oct 2004
Location: Fayetteville, NC
Posts: 1,808
Default

This is probably a dumb question. ( this is my first 5 spd tranny car.) But I am assuming you would never go to 5th while running the 1/4 mile. Right?? Or with that high of a gear would you want to use it??
rebelyell is online now   Reply With Quote
Old 04-27-2005, 02:54 AM   #10 (permalink)
WaterDR
Administrator
 
Join Date: Sep 2004
Posts: 6,370
Default

Nope. 4th will go about 110 miles per hour or so with 4.10's.
__________________


Black 2000 GT Vert:
Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump

My Car

My Email
WaterDR is online now   Reply With Quote
Old 04-27-2005, 04:49 AM   #11 (permalink)
buddyabe
SILVER 01 GT CONVERT AUTO
 
Join Date: Jan 2005
Location: coon rapids mn. u.s.a.
Posts: 205
Default Correction For Mt's#1 Customer

I Rechecked Rpms And Speed Today With My 01 Auto And 4.10 Gears On The Way To Work. I Run 75 miles per hour In Overdrive At 2800 Rpms And 78 Mph At 3000 Rpm's,i Quoted 2 Miles Per Hour Low At 3000 Rpm's On Above Post.
buddyabe is offline   Reply With Quote
Old 04-27-2005, 04:33 PM   #12 (permalink)
02wt5sp
rice..it'swhat'sfordinner
 
02wt5sp's Avatar
 
Join Date: Sep 2004
Location: hampton va
Posts: 324
Default

I just got my 4:10's installed today, I run 2300 rpms at 70 miles per hour(02 5 speed)
All I have to say is that if you have any doubts about which gear to put in, go with the 4:10's. It's the best mod I've done, hands down.
__________________
NO MORE GT!!! UPGRADED TO COBRA!!!
Mods: magnaflow catback, JLT CAI
bone stock dyno #'s 372rwhp and 364rwtq
02wt5sp is offline   Reply With Quote
Old 04-27-2005, 06:28 PM   #13 (permalink)
andysperformance
Member
 
Join Date: Feb 2005
Location: Lancaster county, PA
Posts: 58
Default

Quote:
Originally Posted by MT's#1Customer!
I don't think that is right. I run 75 miles per hour in 5th at about 2800 rpms and I am perfectly calibrated.
Same here, but it seems a little closer to 3k, could be differences in the tach though..
__________________
2000 GT,150 shot NOS, black chrome cobras 17x10.5 and 17x9, 4.10's, slp lm, prochamber, SCT Xcal with Kauffmans tune, and a bunch more
andysperformance is offline   Reply With Quote
Old 04-28-2005, 02:37 PM   #14 (permalink)
Samsstang
Senior Member
 
Join Date: Dec 2004
Location: Colorado
Posts: 371
Default

80 miles per hour @ 3000 RPMs with mine.
__________________
99GT 35th Anniv Edition #4323
01 Roush Stage 2 #6586
Samsstang is offline   Reply With Quote
Old 05-03-2005, 08:53 PM   #15 (permalink)
tedinde
Senior Member
 
Join Date: Jan 2005
Location: Bear Delaware
Posts: 220
Default

you've got a better .62 5th gear compared to my .68 in my 97. I dont regret it a bit. If i had your year car of that trans in mine i'd of went 4.30's.

Anyway if you think your taching to high, go with some taller rear tires next set. You will love those 4.10's and say you shouldve did it sooner!!!
__________________
1997GT SOHC, PI Heads,intake, SCT 4 bank, UPR CAI
Zex Nitrous system 125 hp shot,Steeda Tri-AX
March Underdrive pullies,2 1/2 O/R Pipe, Magnaflow Catbacks,Mac Upper and lower Control arms,5 speed
4.10 Gears,31 spline, Nitto 555 drag radials Spinning
tedinde is offline   Reply With Quote
Old 05-03-2005, 08:57 PM   #16 (permalink)
04 STANG
GT
 
Join Date: Sep 2004
Location: Malvern, PA
Posts: 123
Default

Gears calculator
__________________
2004 Mustang GT
04 STANG is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Ad Management by RedTyger

SEO by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48