Frpp Full Induction Kit Opinions?

WhitePony · 07-18-2006, 09:08 PM

http://www.modulardepot.com/product_...345ea0a4d738f3

i have a 97 gt this seems like a good mod. what do ya think?

ChrisJ · 07-18-2006, 09:46 PM

You can find it cheaper on ebay...

Its a bullitt intake...

WhitePony · 07-18-2006, 10:03 PM

so its a bullit intake for no pi 4.6's?

Saleen S330 · 07-19-2006, 05:59 AM

Basically. It was the intake they came out with years ago and then remade it and slapped it on the bullitt. I'd rather get PI heads then get a bullitt intake. you'll see alot bigger gains.

spike_africa · 07-19-2006, 06:55 AM

Its what the bullit is based off of. I would only get it if you plan to stay with none PI heads. If you want any kinda power from that motor then you need to get the SVO heads and that intake or step up for alot cheaper to the PI heads and intake found on every 99-04 GT.

WhitePony · 07-19-2006, 07:22 AM

I love my mustang to death and i am almost coming to 100,000 miles so would it be a better choice to get a new 2004 4.6 and swap it in?

spike_africa · 07-19-2006, 10:14 AM

If yours is running fine why do that?

If your looking for more power just find used 99-04 Heads and intake and swap them over. With a tune its noraml to pickup over 60rwhp with all stock ford parts. you can gain more by using some aftermarket cams aswel.

The 99-04 PI heads and intake flow alot better then 96-98 parts and bolt right on with little fuss.

WhitePony · 07-19-2006, 06:23 PM

how much do you estimate it would run for the heads and intake? also do you think i could do it myself? im a little unsure about messing the internals of the engine....how much would labor be in chicago area for the full swap?

r3dn3ck · 07-20-2006, 07:53 AM

you can pick up a complete 99-04 2V PI engine for just a few hundred. You have a bunch of mileage so I'd say freshen the bottom and add PI heads or buy a used 4.6 and be happy.

WhitePony · 07-20-2006, 08:31 AM

k thanks...is the 4.6 swap simple or is there more parts needed?

r3dn3ck · 07-20-2006, 09:31 AM

it's not a swap... it's a direct replacement. and it's quite easy with a couple friends and the right tools.

07-18-2006, 09:08 PM	#1 (permalink)
WhitePony Member Join Date: Dec 2005 Location: Barrington, IL Posts: 92	Frpp Full Induction Kit Opinions? http://www.modulardepot.com/product_...345ea0a4d738f3 i have a 97 gt this seems like a good mod. what do ya think?

07-19-2006, 06:55 AM	#5 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,191	Its what the bullit is based off of. I would only get it if you plan to stay with none PI heads. If you want any kinda power from that motor then you need to get the SVO heads and that intake or step up for alot cheaper to the PI heads and intake found on every 99-04 GT. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

07-19-2006, 10:14 AM	#7 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,191	If yours is running fine why do that? If your looking for more power just find used 99-04 Heads and intake and swap them over. With a tune its noraml to pickup over 60rwhp with all stock ford parts. you can gain more by using some aftermarket cams aswel. The 99-04 PI heads and intake flow alot better then 96-98 parts and bolt right on with little fuss. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
man today was a great day	PureStang	The Lounge	10	11-24-2006 01:43 PM
Supercharging	bruce_sc	Forum Feedback and Suggestions	4	11-21-2006 04:49 PM
Old track video	TayWolf55	Videos	2	05-15-2006 12:55 PM
Opinions on suspension mods!!!	foncarelli	General Tech Forum	11	11-17-2005 11:42 PM
How much Hp Will I see from this set up?	danbc21	The Lounge	13	07-24-2005 10:17 PM

07-18-2006, 09:46 PM	#2 (permalink)
ChrisJ Junior Member Join Date: Jun 2006 Posts: 5	You can find it cheaper on ebay... Its a bullitt intake...

07-18-2006, 10:03 PM	#3 (permalink)
WhitePony Member Join Date: Dec 2005 Location: Barrington, IL Posts: 92	so its a bullit intake for no pi 4.6's?

07-19-2006, 05:59 AM	#4 (permalink)
Saleen S330 Banned Join Date: Jan 2006 Location: Sumter, SC Posts: 900	Basically. It was the intake they came out with years ago and then remade it and slapped it on the bullitt. I'd rather get PI heads then get a bullitt intake. you'll see alot bigger gains.

07-19-2006, 07:22 AM	#6 (permalink)
WhitePony Member Join Date: Dec 2005 Location: Barrington, IL Posts: 92	I love my mustang to death and i am almost coming to 100,000 miles so would it be a better choice to get a new 2004 4.6 and swap it in?

07-19-2006, 06:23 PM	#8 (permalink)
WhitePony Member Join Date: Dec 2005 Location: Barrington, IL Posts: 92	how much do you estimate it would run for the heads and intake? also do you think i could do it myself? im a little unsure about messing the internals of the engine....how much would labor be in chicago area for the full swap?

07-20-2006, 07:53 AM	#9 (permalink)
r3dn3ck Wowbagger hates me too! Join Date: Nov 2005 Location: Magrathea/California Posts: 6,856	you can pick up a complete 99-04 2V PI engine for just a few hundred. You have a bunch of mileage so I'd say freshen the bottom and add PI heads or buy a used 4.6 and be happy.

07-20-2006, 08:31 AM	#10 (permalink)
WhitePony Member Join Date: Dec 2005 Location: Barrington, IL Posts: 92	k thanks...is the 4.6 swap simple or is there more parts needed?

07-20-2006, 09:31 AM	#11 (permalink)
r3dn3ck Wowbagger hates me too! Join Date: Nov 2005 Location: Magrathea/California Posts: 6,856	it's not a swap... it's a direct replacement. and it's quite easy with a couple friends and the right tools.