GT's with over 400hp
Just wondering how many members have a Mustang GT (any year) with OVER 400 hp. Just throw your numbers, and dyno sheet, if you have them. Thought this would be a cool thread...
|
i got 399...
|
lol Thats close enough i guess...list your mods and dyno if you have it. I'm just curious to see the setups
|
nah im eating shit lol, dont even have a mustang anymore, drive a slow 300hp lexus IS
|
only person i have seen with those numbers is dom, he had a procharger on his car. But im a little outdated with the users and their cars since im not a regular on the boards.
maybe fonzy is around those numbers, i know he had a blower and a lot of stuff done to his car. |
thats supercharger numbers....no way around it
|
here ya go i have 610hp 598 tq mods 2.6 kb 18 lbs eagle forge crank, eagle forge h-beam rods , arias 9.8 to 1 14 cc dish pistons , ported stock heads , and crower stage 4 blower cams and patriot springs, eaton 31 spline axles and 4.30 gears i might have forgot something, o yea all the longtubes and exhaust junk and also 116 race fuel ,, and also forgot the lincon aviator pump with that bap on it
|
Originally Posted by StreetRacer
(Post 281117)
thats supercharger numbers....no way around it
|
2 Attachment(s)
Here you go.
The 420 was a little too risky without installing the cobra double pumpers. Attachment 9467 Attachment 9468 |
Originally Posted by spike_africa
(Post 281128)
Or a bolt on car with nitrous.
|
yeah thats not the same as a car that makes it with a supercharger, right...
|
1 Attachment(s)
Originally Posted by flyinfox
(Post 281119)
here ya go i have 610hp 598 tq mods 2.6 kb 18 lbs eagle forge crank, eagle forge h-beam rods , arias 9.8 to 1 14 cc dish pistons , ported stock heads , and crower stage 4 blower cams and patriot springs, eaton 31 spline axles and 4.10 gears i might have forgot something, o yea all the longtubes and exhaust junk and also 116 race fuel ,, and also forgot the lincon aviator pump with that bap on it
my pig has max 396 hp at 6k rpms max 392 torque at 4300-4400 rpms. those were final numbers. my first dyno pull was 408 hp 390 tq ran out of pump at 5500 rpms :eek: so some timing got pulled and added a BAP and resulted with those numbers up top. my car is a auto and the only mods i had were vortech, powerpipe, 3.1 pulley (11-12 psi), intercooler, 75mm TB, accufag plenum and magnaflow exhaust. thats right stock manifolds and stock 4 cat H pipe!!! heres a bad pic of my dyno sheet. Attachment 24175 |
Originally Posted by StreetRacer
(Post 281163)
that wouldnt make it a 400hp car...just a car that can do 400hp when you push a button...not quite the same
|
[QUOTE=stanger00;281201]i think you need more fuel pump for that much power. i could be wrong
QUOTE] no not quit a 315 lph pump with a 40 amp bap on it it does pretty good |
Originally Posted by stanger00
(Post 281203)
this statement doesnt make sense
|
you make nitrous sound like it only works for a split second. thats what i think of a "spurt" split second just like if you were to spurt one on to a chicks face ETC.
my idea of how nitrous works is that it comes on in 2nd gear after 3k rpms turns off with window switch (lets say the window is on at 3k rpms off at 6k rpms)shift to third nitrous comes back on turns off at the window switch.... that doesnt sound like a "spurt" to me. |
My car makes 423 rwhp and 550 rwtq on nitrous. It also has ran 11.55 @ 118 on the track......that's something a 423 rwhp blower car won't do:D
|
Lmgdao @ making 400 hp with a supercharger is not the same as with nitrous. 400 hp is 400 hp any way you look at it streetracer.
|
Originally Posted by 4.6 Love
(Post 281214)
Lmgdao @ making 400 hp with a supercharger is not the same as with nitrous. 400 hp is 400 hp any way you look at it streetracer.
|
i havent even gotten into 11's yet. the car isnt setup right. fastest i been was 12.5 @ 115 bouncing the limiter before the traps.
|
Originally Posted by JayC
(Post 281216)
Actually it's much different .....with nitrous you'll have 100+ more rwtq. Torque wins races BTW:D
Typical person who has never used nitrous and only goes by what other uneducated people tell him about it. |
Mine makes around 380....or about 440 to the fly wheel.
|
For some reason, some people look at nitrous as cheating. An n/a motor making 400 hp will always get more respect. Even some people think a sc is cheating.
|
i would rather have a N/A high hp motor than the forced induction. But i would put NOS on it before a supercharger.
|
whats the highest N/A motor on the forum? Anybody know?
|
the highest i have ever seen in person was a guy that used to post on here his name is mike. He had a 01 with stock motor bottom end, ported heads,vt stage 2's,full exhaust,full bolt on's made 325rwhp. Thats the most i have ever heard a stock bottom end car ever make. His car was wicked fast even at OSW a badly prepped track his car went 11.8x's most of the time it was sick. Not what i would totally call streetable but a nice fast car.
He sold the car locally down here and he has been around since. And i woudl rather have a motor with a power adder because its just so much cheaper to make more hp then being N/A. |
But i dont like the idea of the constant strain on the motor from the supercharger, whether the tune is good and you dont get on it that often. But i get on it a little when i drive. I want to eventually get the N/A setup finished and throw a 75-125 shot on and only use the NOS for track purposes. Which means i would have to take the bottle out when im just regular driving cause i would be too tempted to spray a lil now and then, lol.
|
Originally Posted by spike_africa
(Post 281351)
the highest i have ever seen in person was a guy that used to post on here his name is mike. He had a 01 with stock motor bottom end, ported heads,vt stage 2's,full exhaust,full bolt on's made 325rwhp. Thats the most i have ever heard a stock bottom end car ever make. His car was wicked fast even at OSW a badly prepped track his car went 11.8x's most of the time it was sick. Not what i would totally call streetable but a nice fast car.
He sold the car locally down here and he has been around since. And i woudl rather have a motor with a power adder because its just so much cheaper to make more hp then being N/A. |
Yes 3v2000gt has a built block.
|
Hes also not a 2v either. Hes using 3v heads,intake.
|
still a gt motor he said any year gt
|
yeah any year gt. Im going forged bottom end later on, with heads, cams, and NOS shouldnt have a problem with reaching 400. With some weight reduction and slicks that will be a good car.
|
Originally Posted by flyinfox
(Post 281473)
still a gt motor he said any year gt
|
yeah he had a badass motor in that thing!! Almost 400 hp...
|
i should be making around 400hp with my P1sc kit...when it gets here...when i install it...when i get it tuned...
|
thats a lot of "when i"'s. Better post some pics of the install!
|
All times are GMT -7. The time now is 03:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands