|
video of gears
where did all the vids of the different gears!? I know i found them somewhere!! :confused:
|
www.stangnet.com in their forums
|
She beat me to it. Oh, and dont even watch the video, just buy the 4.10s, youll thank me.
|
Haha THANK YOU!! I was looking every where for them!!! Thanks for the help!
|
4.10s all the way.. you'll regret anything less.
|
Originally Posted by csledd
4.10s all the way.. you'll regret anything less.
|
You guys LOVE those 4.10s huh?? They that much better than 3.73's??
|
|
they are definately that much better than 4.10s... here's is the best paragraph I've ever read explaining it
"Gears mulitply your engine's torque to get the car up to speed easier. Without gears to mulitply the engines torque, you will never be able to get your car to take off from a stoplight. Gears are numbered as a ratio, for example 3.27:1. This means that the drive gear (pinion gear) must rotate 3.27 times for the driven gear (ring gear) to rotate once. Let's look at some math to better illustrate this. A stock Mustang GT weighs in at about 3500lbs, its engine has a horsepower rating of 225hp and a torque rating of say 300 lb./ft of torque. Without gears your engine only making 225hp and 300lb./ft of torque will have to try to move a 3500lb mass. That simply isn't gonna happen. Now lets see what gears can do for us. Your typical Mustang has a first gear ratio of about 3.3:1 (in the 96-up cars.) So by taking it's torque of 300*3.3, you now have 990lb/ft of torque to help your car take off. That's still not enough to make for trouble free take-off's. Now take that number and use rear-end geras of say 3.27:1 to mulitply that onto the wheels you now have 3237lb/ft of torque to accelerate you. While this is a healthy number, its still less than your car weighs. Let's see what happens when we install say 4.30:1 gears to the car with 3.27's 300*3.3*4.30=4257lb/ft of torque! That's over 1000 lb/ft of torque, 1020lb/ft to be exact that will help your car off the line. This means less bogging, and a car that is extremely fun to drive. By this example, you can see the advantage of a numerically higher gear ratio." |
Originally Posted by csledd
they are definately that much better than 4.10s... here's is the best paragraph I've ever read explaining it
"Gears mulitply your engine's torque to get the car up to speed easier. Without gears to mulitply the engines torque, you will never be able to get your car to take off from a stoplight. Gears are numbered as a ratio, for example 3.27:1. This means that the drive gear (pinion gear) must rotate 3.27 times for the driven gear (ring gear) to rotate once. Let's look at some math to better illustrate this. A stock Mustang GT weighs in at about 3500lbs, its engine has a horsepower rating of 225hp and a torque rating of say 300 lb./ft of torque. Without gears your engine only making 225hp and 300lb./ft of torque will have to try to move a 3500lb mass. That simply isn't gonna happen. Now lets see what gears can do for us. Your typical Mustang has a first gear ratio of about 3.3:1 (in the 96-up cars.) So by taking it's torque of 300*3.3, you now have 990lb/ft of torque to help your car take off. That's still not enough to make for trouble free take-off's. Now take that number and use rear-end geras of say 3.27:1 to mulitply that onto the wheels you now have 3237lb/ft of torque to accelerate you. While this is a healthy number, its still less than your car weighs. Let's see what happens when we install say 4.30:1 gears to the car with 3.27's 300*3.3*4.30=4257lb/ft of torque! That's over 1000 lb/ft of torque, 1020lb/ft to be exact that will help your car off the line. This means less bogging, and a car that is extremely fun to drive. By this example, you can see the advantage of a numerically higher gear ratio." |
Originally Posted by csledd
they are definately that much better than 4.10s... here's is the best paragraph I've ever read explaining it
"Gears mulitply your engine's torque to get the car up to speed easier. Without gears to mulitply the engines torque, you will never be able to get your car to take off from a stoplight. Gears are numbered as a ratio, for example 3.27:1. This means that the drive gear (pinion gear) must rotate 3.27 times for the driven gear (ring gear) to rotate once. Let's look at some math to better illustrate this. A stock Mustang GT weighs in at about 3500lbs, its engine has a horsepower rating of 225hp and a torque rating of say 300 lb./ft of torque. Without gears your engine only making 225hp and 300lb./ft of torque will have to try to move a 3500lb mass. That simply isn't gonna happen. Now lets see what gears can do for us. Your typical Mustang has a first gear ratio of about 3.3:1 (in the 96-up cars.) So by taking it's torque of 300*3.3, you now have 990lb/ft of torque to help your car take off. That's still not enough to make for trouble free take-off's. Now take that number and use rear-end geras of say 3.27:1 to mulitply that onto the wheels you now have 3237lb/ft of torque to accelerate you. While this is a healthy number, its still less than your car weighs. Let's see what happens when we install say 4.30:1 gears to the car with 3.27's 300*3.3*4.30=4257lb/ft of torque! That's over 1000 lb/ft of torque, 1020lb/ft to be exact that will help your car off the line. This means less bogging, and a car that is extremely fun to drive. By this example, you can see the advantage of a numerically higher gear ratio." |
Will sounds nice and all but in the future my car will be turbo chaarged and 3.73''s WILL be better!! No 4.10's for me! haha
|
Ive got 3.90s and im happy I didnt go with anything else.
|
Originally Posted by Grimmz
OoOoOoOoOoOoOoOo!!!! well that explains alot, then why do people say v6's should go with 3.73's instead of 4.10s?
|
Originally Posted by dannyb785
because theyll top out super quick. GT top speed is somewhere over 130, so 4.10's would still keep it well over 100. v6's top at i believe 118, so itd not be good when u run a 1/4 mile w/ other mods bc you coudl possibly hit the top speed before you finish the quarter mile! And thatd be bad!!
|
Originally Posted by csledd
they are definately that much better than 4.10s... here's is the best paragraph I've ever read explaining it
"Gears mulitply your engine's torque to get the car up to speed easier. Without gears to mulitply the engines torque, you will never be able to get your car to take off from a stoplight. Gears are numbered as a ratio, for example 3.27:1. This means that the drive gear (pinion gear) must rotate 3.27 times for the driven gear (ring gear) to rotate once. Let's look at some math to better illustrate this. A stock Mustang GT weighs in at about 3500lbs, its engine has a horsepower rating of 225hp and a torque rating of say 300 lb./ft of torque. Without gears your engine only making 225hp and 300lb./ft of torque will have to try to move a 3500lb mass. That simply isn't gonna happen. Now lets see what gears can do for us. Your typical Mustang has a first gear ratio of about 3.3:1 (in the 96-up cars.) So by taking it's torque of 300*3.3, you now have 990lb/ft of torque to help your car take off. That's still not enough to make for trouble free take-off's. Now take that number and use rear-end geras of say 3.27:1 to mulitply that onto the wheels you now have 3237lb/ft of torque to accelerate you. While this is a healthy number, its still less than your car weighs. Let's see what happens when we install say 4.30:1 gears to the car with 3.27's 300*3.3*4.30=4257lb/ft of torque! That's over 1000 lb/ft of torque, 1020lb/ft to be exact that will help your car off the line. This means less bogging, and a car that is extremely fun to drive. By this example, you can see the advantage of a numerically higher gear ratio." I think thats going to be shoved into the gear FAQ if it hasnt been already. |
Originally Posted by theponyfactor
I guess I don't understand what your saying. Why wouldnt you want to top out?
say for example, your car will accelerate super fast, but then the top speed would only be 100mph(for example). it would suck bc you would be at redline, in 5th gear when goin 100 mph. Its just bad bc when u run anywhere from 13.5-14.0 in the quarter mile, youre usually going 100 flat. IF your car gets any faster(mod wise), you would hit top speed before finishing the quarter mile. |
Originally Posted by StangGT804
Will sounds nice and all but in the future my car will be turbo chaarged and 3.73''s WILL be better!! No 4.10's for me! haha
|
Originally Posted by madmatt
Trust me on this, if you are really going turbo, dont bother with gears, youll just melt the tires. BUT, if they are like 2 years out, then get the 4.10s and just swap em back out when the time comes. Or just go 3.73s. They arent TERRIBLE, I just wish I had gone 4.10s.
|
| All times are GMT -7. The time now is 03:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands