Mustang Boards

Mustang Boards (/)
-   General Tech Forum (https://mustangboards.com/general-tech-forum/)
-   -   NMR, Wheel is whistling. Name that noise! (https://mustangboards.com/general-tech-forum/37646-nmr-wheel-whistling-name-noise.html)

JackThe Ripper 08-28-2009 01:42 PM

NMR, Wheel is whistling. Name that noise!
 
I think i know the problem already, but i wanted to list the symptoms to see if you all think it is the same thing before i start replacing parts.

I bought my wife a Jeep Grand Cherokee LTD and we are selling the 2002 Saturn SL2. It has developed whisteling noise on the front drivers side wheel that sounds kind of like a baby chicken peeping. The speed of the whistle depends on the speed of the car, anything under 30mph and you can hear it, above 30 it seems to go.

the alignment seems fine. there is no pulling to one side or the other when braking. there is a slight steering wheel wobble that i suspect is not related as the tires are pretty worn.

This noise is pretty constant under 30mph, but it disappeared for a few days. I took the saturn to work today and by the time i got here (bout 20 miles) the whistling was back.

I can get a recording of it, i forgot to bring my DVR today which i was gonna nab a sound clip.

i need to fix this so i can sell it.

So...
NAME THAT NOISE!

lol

DJ Fury 08-28-2009 01:46 PM

Brakes?

badtib04 08-28-2009 01:48 PM

brakes sticking? idk kinda random guess lol

rkaz 08-28-2009 01:48 PM

wheel bearing hub

JackThe Ripper 08-28-2009 01:52 PM

not brakes, they should be good. if the rotor was warped i would feel it pulling and bouncing. if it was a rock pressed in the pad, it woulda fallen out long ago and scored the rotor.

badtib04 08-28-2009 01:57 PM

yeah after rkaz said bearing, i was like yeah thats alot more likely lmao

Steeda97 08-28-2009 01:59 PM

wheel bearing.



are the brake pads worn?

JackThe Ripper 08-28-2009 02:04 PM

I was also thinking wheel bearing, but i wasnt sure, some of the symptoms i have heared include popping and also the noise is louder at higher speeds, in this case it disapppears at 30mph. one of my buds works at Big-O tires, he checked the wheel by grabbing and pulling in and out and he couldnt get to budge, it diddnt make any chirping either.

i guess ill just have to take everything off tomorrow and inspect it and see if anything else might be awry. if i cant see shit, then it is probably the bearing after all.

pain in the ass. i fucking hate spindle nuts.

JackThe Ripper 08-28-2009 02:04 PM


Originally Posted by Steeda97 (Post 426233)
wheel bearing.



are the brake pads worn?

should be fine, new pads last year. I remember seeing them 5-6 months ago and they were still nice and thick

Steeda97 08-28-2009 02:08 PM

whats the squeaking sound like? is it a voice? does it say "you shouldn't of sold your mustang?" does it have a thick peruvian accent?

JackThe Ripper 08-28-2009 04:21 PM

yeah, when i slow down it squeaks out "Steeeeeeeda97 has a smallll peeeeeeenissssss"

Steeda97 08-28-2009 04:22 PM

You sir not only have a bad wheel bearing, but a lying automobile as well.

Darkvinyl 08-29-2009 12:35 PM

Could also be the paint (or whatever it is, I always call it paint) on the sides of the pads flaking off and causing a squeaking noise. Have seen it fairly often, when you pull everything off just check the edges of the pad. If it's all flaky that could be your issue.

Tape 08-30-2009 09:35 AM


Originally Posted by badtib04 (Post 426228)
brakes sticking? idk kinda random guess lol


Originally Posted by badtib04 (Post 426232)
yeah after rkaz said bearing, i was like yeah thats alot more likely lmao

I doubt it, JR's car being a new edge. I have 140k and don't expect WB problems for another 140k at the least.


OOOPPPPS..... he's talking about a saturn.

disregard


All times are GMT -7. The time now is 07:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands