Mustang Boards

Mustang Boards (/)
-   General Tech Forum (https://mustangboards.com/general-tech-forum/)
-   -   v6 to v8 swap questions (https://mustangboards.com/general-tech-forum/32627-v6-v8-swap-questions.html)

INtZ 09-25-2008 01:01 PM

v6 to v8 swap questions
 
alright im slowly starting to get parts together for a 5.4l swap(im excited im acctually making headway with this project, normally like to talk alot of "im gonna do this im gonna do that" but with no fallow through) i got a gt oil pan and pickup and i got an engine and transmission lined up just waiting for my paycheck, and the only other really big things im gonna need are a rear diff and a drive shaft or so i hope. the point of this thread is to find out what im gonna have to do for electronics. i was wondering :

is the ignition system tied into the factory ecu or can i just buy an msd ignition system so i can set it and forget it?

with a tuner can i set up a new MAF to compensate for the much larger amounts of air?

are there going to be any crank position sensors, or throttle position sensors, etc problems that im gonna have to deal with?

and what about o2 sensors i could just cancel them with a tuner but id really like to be warned if im running too rich or lean or anything like that?

Any help would be appreciated and if you can think of any other issues that would be great too

Lazerred6 09-25-2008 01:06 PM

If you do this and the price is right I might be interested in your v6 motor how many miles does it have on it

INtZ 09-25-2008 01:07 PM

uhh i think 82000 ill check next time i get a chance to go out to my car and btw might be a while before i acctually do the swap at least a few months

Lazerred6 09-25-2008 01:09 PM

I wouldn't want the motor for a little bit yet anyway and I guess the miles don't matter that much cause i'm going to redo it with forged everything. If this works out

the motor wouldn't go in my car for at least a year

Morgan The Black 09-25-2008 04:54 PM

If I were you, just pick up the whole wiring harness+PCM out of a GT from a junkyard or ebay. You might be able to use some of the sensors from the 5.4 (crank,cam) but basically everything else would be for a GT.

INtZ 09-25-2008 06:37 PM


Originally Posted by Morgan The Black (Post 354091)
If I were you, just pick up the whole wiring harness+PCM out of a GT from a junkyard or ebay. You might be able to use some of the sensors from the 5.4 (crank,cam) but basically everything else would be for a GT.

yeah thats what i was thinking i guess it wouldn't be a project without some hiccups. guess i get to spend an afternoon in a junkyard fishing cable. maybe ill try ebay first...

3.8LMustang 09-25-2008 08:40 PM

dont do it man, lol jk

INtZ 09-26-2008 07:59 AM

oh im doing it lol


All times are GMT -7. The time now is 09:05 AM.


© 2024 MH Sub I, LLC dba Internet Brands