Help! Can't get these bolts off
 

I can't get any of those 4 bolts off that bolt the TB to the phlenum. I have the right sized wrench but the bolts just wont budge and it wearing the metal off the bolts. why??????

-Tim

is it rusted? even if it isnt get some PB blaster and spray it on there that should help or heat it up with a torch be careful though!

What is a PB blaster?

Righty tighty lefty loosey..........:surrender PB blaster but those bolts shouldnt be too hard to take off

heat it up...

they shouldnt be that hard to get out... maybe you should go do some push ups then give it a shot

Try harder hahahaha.

"Left loosey righty tighty"....that made my night :banana:

PB blaster is just like liquid wrench but way better. you can find it at almost any autoparts store

i don't think it's my weakness thats stopping that bolt from comming off. I'm 120 with 10% body fat and i can bench 205. I don't think I need to do pushups...

ill get a PB blaster or see my my exhaust guy will heat it up with a torch for me.

put a half inch rachet on that bastard then. that should break those bolts loose. they are probably 10mm just give a good hit on the wrench most times pulling isnt enough. you probably lack the fore arm fortitude.

spray the bolts down with PB and let it sit for 5-10 minutes..then give a try. try this before you go with a torch.

how are you only weighing 120 pounds?????? Are you a Midget?

no... dont use 1/2 in drive...

use 3/8 in drive... you dont wanna f.ck those bolt ups... that is Al isnt it?

you dont wanna f.uck those threads up...

im like 5-6. I think i might get a PB blaster then. that would probably help me with other projects in future right?

PB blaster is great **** to have around the house anyways. 10x's better than WD-40