Finally got to a dyno

gotMACH04 · 09-29-2007, 05:56 PM

I finally had a chance to get the Mach to a dyno and im pretty pleased with the results...314hp@5000 and 347tq@4100

*venom* · 10-01-2007, 08:18 AM

Do you have any other plans?

gotMACH04 · 10-01-2007, 09:48 AM

next is suspension and rear end, after that comes forged internals...

machnjo · 10-01-2007, 10:12 AM

Nice numbers !!!

mpt_1962 · 10-01-2007, 01:13 PM

gotMACH04 · 10-01-2007, 08:51 PM

thanks, ill post the chart when i figure out how to

jjtgiants · 10-03-2007, 02:23 PM

Very nice numbers! I'd be curious to see the dyno chart and what kind of power you were making at higher RPM's. I'd have to go back and look at the dyno chart for my mach that is long gone, but I don't think it started making good power until higher in the RPM range. I also didn't have header, but it was putting down 304rwhp and 330rwtq.

Congrats man, you've got a bad azz machine!

gotMACH04 · 10-05-2007, 10:33 AM

finally figured this thing out, heres the chart

Nofire · 10-07-2007, 07:12 PM

nice numbers man!

09-29-2007, 05:56 PM	#1 (permalink)
gotMACH04 Senior Member Join Date: Aug 2006 Location: Columbia,KY Posts: 330	Finally got to a dyno I finally had a chance to get the Mach to a dyno and im pretty pleased with the results...314hp@5000 and 347tq@4100 __________________ Hooker L/T's, Hooker O/R X, SLP LM II Catback, MGW Shifter, FRPP 4.10's, JLT CAI, X-CAL 2 Custom Tune By Greg Mayton @ SpeedyDyno

10-01-2007, 08:18 AM	#2 (permalink)
venom Super Moderator Join Date: Sep 2004 Posts: 5,128	Do you have any other plans? __________________ http://www.mustangboards.com/mustang...500/ppuser/102

10-01-2007, 09:48 AM	#3 (permalink)
gotMACH04 Senior Member Join Date: Aug 2006 Location: Columbia,KY Posts: 330	next is suspension and rear end, after that comes forged internals... __________________ Hooker L/T's, Hooker O/R X, SLP LM II Catback, MGW Shifter, FRPP 4.10's, JLT CAI, X-CAL 2 Custom Tune By Greg Mayton @ SpeedyDyno

10-01-2007, 10:12 AM	#4 (permalink)
machnjo Senior Member Join Date: Apr 2006 Location: Austin, Texas Posts: 1,086	Nice numbers !!! __________________ 2004 Screaming Yellow Mach 1 (5spd) 2002 Mineral Grey GT (auto, DD) http://www.cardomain.com/ride/2534038/1 Sig courtesy of wnracing

10-01-2007, 01:13 PM	#5 (permalink)
mpt_1962 Senior Member Join Date: Jun 2007 Location: Twentynine Palms, CA Posts: 812	+1

10-01-2007, 08:51 PM	#6 (permalink)
gotMACH04 Senior Member Join Date: Aug 2006 Location: Columbia,KY Posts: 330	thanks, ill post the chart when i figure out how to __________________ Hooker L/T's, Hooker O/R X, SLP LM II Catback, MGW Shifter, FRPP 4.10's, JLT CAI, X-CAL 2 Custom Tune By Greg Mayton @ SpeedyDyno

10-03-2007, 02:23 PM	#7 (permalink)
jjtgiants jjtgiants Join Date: Jan 2005 Location: Dublin, CA Posts: 3,599	Very nice numbers! I'd be curious to see the dyno chart and what kind of power you were making at higher RPM's. I'd have to go back and look at the dyno chart for my mach that is long gone, but I don't think it started making good power until higher in the RPM range. I also didn't have header, but it was putting down 304rwhp and 330rwtq. Congrats man, you've got a bad azz machine! __________________ Jack the Ripper: "STAY AWAY FROM THE METH ADDICTS for the LOVE OF GOD do NOT **** girls that are into crystal, they will suck you on that shit and you will be sittin there like a bad dave chapelle sketch in no time."

10-07-2007, 07:12 PM	#9 (permalink)
Nofire Sooner #65 Join Date: Dec 2004 Location: University of Oklahoma Posts: 638	nice numbers man! __________________ 2004 Mach 1----Black--------Sold. 285HP, 304TQ I WANT MORE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode