Wynjammer Supercharger

00PerfRedGT · 11-22-2006, 08:16 PM

So I went to have my car dynotuned yesterday with the Wynjammer on at 6lbs. Everyone there was skeptical about the kit because no one has seen or really heard of it. When it came time to dynotune my car it was 58.22 degrees, 30.05 in-Hg, Humidity 27%, and SAE 0.95. It put down 303.90 rwhp and 339.28 rwtq at 4200 rpm. I still had 1800 rpm to go!

After that point it went lean because the stock MAF was pegged. Instead of upgrading MAFs I am going to use a Diablosport MAFia and then retry. I am going back on Tuesday to have it dynotuned with the MAFia and given the results so far my car will be capable of over 350 rwhp and close to 400 rwtq. And keep in mind all this is done with 6lbs of boost, no intercooler, MAC Off-Road H-Pipe, and a Stainless Steel MAC catback. After seeing other people's results with Vortech and Procharger, I am very impressed with it so far and what it will be like on Tuesday.

Next mods: Custom polished powerpipe, Methanol Injection, MAC Ceramic Longtubes and Matching X-Pipe, Accufab 75mm Throttle body and plenum

After those mods I think it will be at the engine's limit

stang00 · 11-24-2006, 03:43 PM

sounds like some good numbers once u get everything in order wuts the link to thw eebsite so we can check out ur kit

00PerfRedGT · 11-24-2006, 07:46 PM

The link is www.wynjammer.com. I'll have to get some pictures up in the next couples days when I get her washed. But yeah I just cant wait until Monday or Tuesday when i go back to get it tuned with the MAFia.

00PerfRedGT · 11-24-2006, 07:50 PM

By the way, I know it is always asked but, what is the limit to my engine? I was thinkin 425 or 450 but I'm not sure how much i want to push it after it gets retuned. I just don't want to start breaking stuff. Thanks

WaterDR · 11-24-2006, 08:07 PM

All depends on how much risk you want to take and how much boost you intend to make.

Running 400 hp at 12 lbs is more rough on the motor then making 425 hp at 8 lbs (if this is even possible).

Most guys would say 425 hp as a max safe point. I just had a conversation with a tuner who recomends 400 as a max. He feels the added 25 hp is not worth the added risk. His comment to me "running 425 hp on these motors with a blower is one bad shift from a blown motor".

Best advice I can give you is to run a max of 10 lbs of boost. Take whatever power you can make at that level, but don't exceed 425.

You may initially make 385 at 10 lbs and then add headers at make 400....still at 10 lbs. Make sense?

00PerfRedGT · 11-24-2006, 10:15 PM

So 425 huh? I thought thats what it was. I will try to get 400 and then call it quits for now. I have been looking at the little things right now, like colder spark plugs, the new MSD coil-on plugs, a boost pipe, shifter gasket, royal purple synthetics for the engine (already running it but its time for an oil change soon) and tranny. After that I'll do the headers and x-pipe. I am wanting to do some gears but what do you guys think 3.73, 3.90, or 4.10? I do very little highyway driving, mainly light to light.

00PerfRedGT · 11-24-2006, 10:16 PM

How do you like your 4.10s WaterDR?

stang00 · 11-25-2006, 06:11 AM

stay under 400hp stay with the blower at maybe 360 max if you want your car to last and run great for yrs to come 400 is nice but u will kill it mucho faster

spike_africa · 11-25-2006, 07:02 AM

its the tune, not the Hp at that level. 400ish rwhp is fine if you have a good tune.

00PerfRedGT · 11-25-2006, 07:17 PM

You are right it is all about the tune, I just hope the tune is right though. I'll probably go for 380-400 and then get all the suspension and gears and it should be fast enough for now. I am also aiming to get racing seats, a rear seat delete, take out the spare (and get AAA), and relocate the battery. What gears do you guys recommend though?

ChrisGT · 11-26-2006, 08:46 AM

4.10's...you'll love them with the blower.

00PerfRedGT · 11-26-2006, 09:30 PM

While I'm in there what else should I do? Rebuild the posi or leave it alone and just worry about the gears and the bearing kit? I was wanting to do 31 spline axles and posi, gears and bearing kit, and a diff cover. Is all this worth it right now or is it some thing I should just do in time? I'm Just going to be running street tires and might go to the track maybe like 5 times a year.

I can't wait until tomorrow....I find out for sure when I can get my car retuned with the MAFia. I hope to God it can be done tomorrow because I am starting to get antsy.

How much of a difference is it with 4.10s and a blower? I know its alot but i mean overall feel of the car and traction issues?

stevemainian · 11-28-2006, 04:03 AM

On that wynjammer website all I see is GM superchargers. Wheres the ones for the moosestangs?

00PerfRedGT · 11-28-2006, 04:14 PM

They dont make them for mustangs anymore, I got their last kit. You can always call and ask though. When I talked to Al at Wynjammer Superchargers he said it was his last kit and that he didnt want to make kits for Ford anymore and that he was going to start making them strictly for Chevy. His reasoning was that there were too many complications with Mustangs (can only run low boost on non-cobra cars, different pullies, bolts, etc.) I think it is stupid but what ever.....

ChrisGT · 11-28-2006, 04:23 PM

Quote:

Originally Posted by 00PerfRedGT

While I'm in there what else should I do? Rebuild the posi or leave it alone and just worry about the gears and the bearing kit? I was wanting to do 31 spline axles and posi, gears and bearing kit, and a diff cover. Is all this worth it right now or is it some thing I should just do in time? I'm Just going to be running street tires and might go to the track maybe like 5 times a year.

I can't wait until tomorrow....I find out for sure when I can get my car retuned with the MAFia. I hope to God it can be done tomorrow because I am starting to get antsy.

How much of a difference is it with 4.10s and a blower? I know its alot but i mean overall feel of the car and traction issues?

It's always worthwhile to build your rearend while you've got it apart. That way you'll only have to pay for it to be done ONCE! You'll love the 4.10's, car will be right at home with them. Oh, and as you start increasing power traction is always going to be an issue..lol

but it is definitely streetable and most importantly........fun.

00PerfRedGT · 11-28-2006, 04:56 PM

I just got back from HP Performance over in Orange Park, FL where I got my car retuned with the Diablosport MAFia and Ford Racing 30 lb/hr injectors. It put down 317.19 rwhp and 349.62 rwtq on a dynojet. I am a little disapointed about the numbers but there was belt slippage on this run.

I still cant complain though, it feels really strong and is a blast to drive.

On the other hand I dont know how I am going to fix my traction problem now. It spins like crazy now all the way through third gear. I have to go from a pretty good roll to keep it from getting crazy. It is nice to watch the speedo climb faster than the RPMs though.

My next tires are going to be 265/35 BFG KDW 2 and 315/30 BFG KDW 2. Do upper and lower control arms help out ALOT? Because I need alot of help back there. Thanks

White04GT · 12-01-2006, 11:47 PM

Eeeek thoughs numbers are low. You still running 6lbs of boost? crank it up.

*venom* · 12-02-2006, 08:02 AM

Get LCAs for the rear as this will help you keep the tires planted squarely on the floor.

00PerfRedGT · 12-02-2006, 10:06 PM

I called the owner of Wynjammer Superchargers the other day to talk to him about upgrading to a 9 lb pulley (I am pretty sure that is the only size he has between 6 and 12). He told me he didnt want to send it to me becuase I would end up blowing up my motor. I already know that is BS but he neing a previous ford guy knows that the GT motor is weak. I know this too but with me only making 320, with a 9 lb pulley and a goodyear gatorback belt I still would be near 400 which would be fine.

Another thing said to do was use shorty headers and not use a throttle body or intake plenum. The way he explained it makes since and I know the difference between the scavenging effects of long tubes vs. short tubes but I just want some one elses opinion about the things states above.

After talking to the guy for a good hour I found out alot of things. He was the first person to super charge alot of later model cars and trucks. The pictures on his site are of cars like a 95 Cobra R and a Lincoln Mark VIII that he made the first blowers for. He actually orginated the design for putting a 32 valve in a Mustang for a supercharged GT, Cobra, etc. He then sold these rights to Granatelli who then sold them to Paxton. The guy is really smart about cars but thats what really makes me wonder why he told me this but yet of heard from other people to do long tubes and throttle body and intake plenum.

Sorry for being so long winded.lol

00PerfRedGT · 12-02-2006, 10:07 PM

I'll have to get some but I just dont know when......Christmas.....

11-22-2006, 08:16 PM	#1 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	Wynjammer Supercharger So I went to have my car dynotuned yesterday with the Wynjammer on at 6lbs. Everyone there was skeptical about the kit because no one has seen or really heard of it. When it came time to dynotune my car it was 58.22 degrees, 30.05 in-Hg, Humidity 27%, and SAE 0.95. It put down 303.90 rwhp and 339.28 rwtq at 4200 rpm. I still had 1800 rpm to go! After that point it went lean because the stock MAF was pegged. Instead of upgrading MAFs I am going to use a Diablosport MAFia and then retry. I am going back on Tuesday to have it dynotuned with the MAFia and given the results so far my car will be capable of over 350 rwhp and close to 400 rwtq. And keep in mind all this is done with 6lbs of boost, no intercooler, MAC Off-Road H-Pipe, and a Stainless Steel MAC catback. After seeing other people's results with Vortech and Procharger, I am very impressed with it so far and what it will be like on Tuesday. Next mods: Custom polished powerpipe, Methanol Injection, MAC Ceramic Longtubes and Matching X-Pipe, Accufab 75mm Throttle body and plenum After those mods I think it will be at the engine's limit __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-24-2006, 03:43 PM	#2 (permalink)
stang00 Civic Join Date: Jan 2005 Location: brewster ny Posts: 2,577	sounds like some good numbers once u get everything in order wuts the link to thw eebsite so we can check out ur kit __________________ 2007 civic si galaxy grey 213 WHP 176wtrq SKunk 2 70mm catback buddy club race header injen CAI hondata tb spacer kenwood 7in dvd navi head unit 2, 12in JL audio W3's JL 500\1 amp 18in bronze 5zigen pro racers (wrapped in bfg goodrich KDW2 225\40\18) Brembo dilled rotors ebc green stuff pads Hfp suspension hfp lip kit hfp fogs 5% tint red interior underglow

11-24-2006, 07:46 PM	#3 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	The link is www.wynjammer.com. I'll have to get some pictures up in the next couples days when I get her washed. But yeah I just cant wait until Monday or Tuesday when i go back to get it tuned with the MAFia. __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-24-2006, 07:50 PM	#4 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	By the way, I know it is always asked but, what is the limit to my engine? I was thinkin 425 or 450 but I'm not sure how much i want to push it after it gets retuned. I just don't want to start breaking stuff. Thanks __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-24-2006, 08:07 PM	#5 (permalink)
WaterDR Administrator Join Date: Sep 2004 Posts: 6,363	All depends on how much risk you want to take and how much boost you intend to make. Running 400 hp at 12 lbs is more rough on the motor then making 425 hp at 8 lbs (if this is even possible). Most guys would say 425 hp as a max safe point. I just had a conversation with a tuner who recomends 400 as a max. He feels the added 25 hp is not worth the added risk. His comment to me "running 425 hp on these motors with a blower is one bad shift from a blown motor". Best advice I can give you is to run a max of 10 lbs of boost. Take whatever power you can make at that level, but don't exceed 425. You may initially make 385 at 10 lbs and then add headers at make 400....still at 10 lbs. Make sense? __________________ Black 2000 GT Vert: Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump My Car My Email

11-24-2006, 10:15 PM	#6 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	So 425 huh? I thought thats what it was. I will try to get 400 and then call it quits for now. I have been looking at the little things right now, like colder spark plugs, the new MSD coil-on plugs, a boost pipe, shifter gasket, royal purple synthetics for the engine (already running it but its time for an oil change soon) and tranny. After that I'll do the headers and x-pipe. I am wanting to do some gears but what do you guys think 3.73, 3.90, or 4.10? I do very little highyway driving, mainly light to light. __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-24-2006, 10:16 PM	#7 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	How do you like your 4.10s WaterDR? __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-25-2006, 06:11 AM	#8 (permalink)
stang00 Civic Join Date: Jan 2005 Location: brewster ny Posts: 2,577	stay under 400hp stay with the blower at maybe 360 max if you want your car to last and run great for yrs to come 400 is nice but u will kill it mucho faster __________________ 2007 civic si galaxy grey 213 WHP 176wtrq SKunk 2 70mm catback buddy club race header injen CAI hondata tb spacer kenwood 7in dvd navi head unit 2, 12in JL audio W3's JL 500\1 amp 18in bronze 5zigen pro racers (wrapped in bfg goodrich KDW2 225\40\18) Brembo dilled rotors ebc green stuff pads Hfp suspension hfp lip kit hfp fogs 5% tint red interior underglow

11-25-2006, 07:02 AM	#9 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 6,971	its the tune, not the Hp at that level. 400ish rwhp is fine if you have a good tune. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

11-25-2006, 07:17 PM	#10 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	You are right it is all about the tune, I just hope the tune is right though. I'll probably go for 380-400 and then get all the suspension and gears and it should be fast enough for now. I am also aiming to get racing seats, a rear seat delete, take out the spare (and get AAA), and relocate the battery. What gears do you guys recommend though? __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-26-2006, 08:46 AM	#11 (permalink)
ChrisGT Senior Member Join Date: Jun 2006 Posts: 149	4.10's...you'll love them with the blower.

11-26-2006, 09:30 PM	#12 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	While I'm in there what else should I do? Rebuild the posi or leave it alone and just worry about the gears and the bearing kit? I was wanting to do 31 spline axles and posi, gears and bearing kit, and a diff cover. Is all this worth it right now or is it some thing I should just do in time? I'm Just going to be running street tires and might go to the track maybe like 5 times a year. I can't wait until tomorrow....I find out for sure when I can get my car retuned with the MAFia. I hope to God it can be done tomorrow because I am starting to get antsy. How much of a difference is it with 4.10s and a blower? I know its alot but i mean overall feel of the car and traction issues? __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-28-2006, 04:03 AM	#13 (permalink)
stevemainian I8URVTEC Join Date: Dec 2005 Location: Virginia Beach, VA Posts: 193	On that wynjammer website all I see is GM superchargers. Wheres the ones for the moosestangs? __________________ 2003 GT 5 speed - 360 rwhp / 375 wtq Flowmaster Catback Few suspension upgrades Black Bullitt's with DD's in rear Procharger P-1SC, 10psi, 3 core intercooler *SCT Chip (Dynotuned by Ed Clark at Steen Racing)

11-28-2006, 04:14 PM	#14 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	They dont make them for mustangs anymore, I got their last kit. You can always call and ask though. When I talked to Al at Wynjammer Superchargers he said it was his last kit and that he didnt want to make kits for Ford anymore and that he was going to start making them strictly for Chevy. His reasoning was that there were too many complications with Mustangs (can only run low boost on non-cobra cars, different pullies, bolts, etc.) I think it is stupid but what ever..... __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

11-28-2006, 04:56 PM	#16 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	I just got back from HP Performance over in Orange Park, FL where I got my car retuned with the Diablosport MAFia and Ford Racing 30 lb/hr injectors. It put down 317.19 rwhp and 349.62 rwtq on a dynojet. I am a little disapointed about the numbers but there was belt slippage on this run. I still cant complain though, it feels really strong and is a blast to drive. On the other hand I dont know how I am going to fix my traction problem now. It spins like crazy now all the way through third gear. I have to go from a pretty good roll to keep it from getting crazy. It is nice to watch the speedo climb faster than the RPMs though. My next tires are going to be 265/35 BFG KDW 2 and 315/30 BFG KDW 2. Do upper and lower control arms help out ALOT? Because I need alot of help back there. Thanks __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

12-01-2006, 11:47 PM	#17 (permalink)
White04GT Procharged Join Date: Sep 2005 Location: Kingwood, Tx. Posts: 954	Eeeek thoughs numbers are low. You still running 6lbs of boost? crank it up. __________________ 2004 White GT just another Procharged GT. 401rwhp/407rwtq 8#'s in hot texas summer heat, built auto transmission.

12-02-2006, 08:02 AM	#18 (permalink)
venom Super Moderator Join Date: Sep 2004 Posts: 5,270	Get LCAs for the rear as this will help you keep the tires planted squarely on the floor. __________________ http://www.mustangboards.com/mustang...500/ppuser/103

12-02-2006, 10:06 PM	#19 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	I called the owner of Wynjammer Superchargers the other day to talk to him about upgrading to a 9 lb pulley (I am pretty sure that is the only size he has between 6 and 12). He told me he didnt want to send it to me becuase I would end up blowing up my motor. I already know that is BS but he neing a previous ford guy knows that the GT motor is weak. I know this too but with me only making 320, with a 9 lb pulley and a goodyear gatorback belt I still would be near 400 which would be fine. Another thing said to do was use shorty headers and not use a throttle body or intake plenum. The way he explained it makes since and I know the difference between the scavenging effects of long tubes vs. short tubes but I just want some one elses opinion about the things states above. After talking to the guy for a good hour I found out alot of things. He was the first person to super charge alot of later model cars and trucks. The pictures on his site are of cars like a 95 Cobra R and a Lincoln Mark VIII that he made the first blowers for. He actually orginated the design for putting a 32 valve in a Mustang for a supercharged GT, Cobra, etc. He then sold these rights to Granatelli who then sold them to Paxton. The guy is really smart about cars but thats what really makes me wonder why he told me this but yet of heard from other people to do long tubes and throttle body and intake plenum. Sorry for being so long winded.lol __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

12-02-2006, 10:07 PM	#20 (permalink)
00PerfRedGT Its good to be blown... Join Date: Mar 2006 Location: Jacksonville, Florida Posts: 179	I'll have to get some but I just dont know when......Christmas..... __________________ 2000 Boss Shinoda Lv.1 Performance Red w/ Tan Leather #00-01 Wynjammer Supercharger, SCT, MAC O/R H, MAC SS CB, B&M shifter, Hotchkis C/Cs, Tokico shocks & struts, Hotchkis 2" drop, Chrome FR500s 18x9 & 18x10, 255/40/18 & 285/40/18 Michelin Pilots, Smoked Headlights w/ 8000k, Smoked Foglights w/ 8000k, 5% Tint, Blackout tails, Honeycomb Panel, UPR Interior Billet, GT Hood & Side Scoops, Audiobahn system, Royal Purple Synthetics, Steeda Oil Seperator, Spec Stage 3, Spec Aluminum Flywheel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diablo Tuner Problem On Trany!!!!!!	ace1_15	Modular 4.6L Tech	7	09-20-2006 09:34 AM
Father and Son Stangs...	LOOT	Pictures	7	04-19-2006 08:07 AM
Flowmaster exhaust systems????	cdw03v6	V6 Tech Forums	1	09-04-2005 11:02 AM
Opinion: White lettered tires	rebelyell	The Lounge	8	08-12-2005 01:03 PM
18 inch wheels for 05 Mustang	3ponies	General Tech Forum	5	06-22-2005 02:05 PM