Mustang Boards

Mustang Boards (/)
-   Drag Racing! (https://mustangboards.com/drag-racing/)
-   -   Is it the car or is it the driver? (https://mustangboards.com/drag-racing/38327-car-driver.html)

JayC 10-25-2009 08:18 AM

Is it the car or is it the driver?
 
Just thought I'd let you in on a little observation I made at the track today. As some of you know I recently changed the clutch, transmission as well as the shifter in recent weeks. As a result I had to break things in on the way to the NMRA finals. At the finals I was very gentle (needed to make the 2.5 hour drive home) on the new set-up and ran 11.80's in the 1/4 and 7.60's 1/8 mile times.

So today at the local 1/8 I decided to step up the driving a bit and lean on the new combo hoping for a new best.
First pass off the street I launched at 4500 and more aggressively shifted while still lifting on each shift. Results was a 7.57@94 with a 1.64 60'. Knowing the car had more in it I made one more pass without changes to verify things and with the same 4500 launch ran a 7.56@94 with a slightly better 1.62 60'.
Since the track seemed to be coming around, I raised the launch to 5000 and although still lift shifting ran a 7.47@94 with a 1.58 60', good for a new season's best E.T.
For the last pass of the day I stuck with the 5000 launch but powershifted every gear and was rewarded with a another new best of 7.38@93 and a 1.57 60'. All these were ran with bottle pressure right on 1000psi with steady air temps. The only change was more aggressive driving......something a lot of people never figure out. :D
__________________

gotMACH04 10-25-2009 02:16 PM

congrats, what clutch/tranny did you put in?

JayC 10-25-2009 03:11 PM


Originally Posted by gotMACH04 (Post 435715)
congrats, what clutch/tranny did you put in?

Promotion Super King Cobra clutch, NCR built T-45, carbon syncros, billet 3-4 shift fork, billet shift keys, HD springs, bronze shift fork pads etc. MGW orange handle shifter. Everything worked great except I pulled the MGW and put my old UPR shifter back in. I never liked the feel of the MGW and was very comfortable with the UPR after having it 7 years.

Kyanbi 10-25-2009 03:12 PM

Good momento Jay. I'm not one to beat on my car, but occasionally I'll drive it like it's meant to be driven. Hell, I'm not the best driver I'm sure, but I'm better than most. There's no sense in putting money into your car and not knowing how to take advantage of it.

And +1 on the question as to what clutch/transmission work you did.

Kyanbi 10-25-2009 03:13 PM

Looks like you beat me by a minute lol. But damn, I guess if you're going to redo the transmission, do it right! Impressive :)

330CubeGt 10-25-2009 04:36 PM

Driver Mod FTW, Lol.

Nice Job.

JayC 10-27-2009 08:39 PM

Thanks everyone.:)

spike_africa 10-28-2009 06:30 AM

For just changing the rpm's 500 and powershifting that is a nice drop in ET.

Mr. Zip 10-28-2009 06:57 AM

Wanna drive mine for me? :D

JayC 10-28-2009 08:20 PM


Originally Posted by Mr. Zip (Post 436108)
Wanna drive mine for me? :D

I'm not comfortable breaking other people's stuff:D

TUFF 4.6 10-29-2009 06:52 PM

Yeah, breakin' your shit's bad enough, but breakin'other peoples is a lot worse:D

How much stuff have you broke on your car?

JayC 10-30-2009 06:55 PM


Originally Posted by TUFF 4.6 (Post 436330)
Yeah, breakin' your shit's bad enough, but breakin'other peoples is a lot worse:D

How much stuff have you broke on your car?

Two T-Loks, finally got a Detroit True-trac. Three clutches, three 3-4 shift forks, one 1-2 shift plate. Not bad actually for over 7 years and more than 400 track passes, probably 100 of them with a 150 shot. :)


All times are GMT -7. The time now is 02:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands