help for a 1994 gt

eddie · 02-04-2005, 12:39 AM

a we had a flood and my 1994 mustang gt 5.0L stalled in the water. i have no water in the oil or in the intake but the motor will not turn i have pulled the spark pulg and their was no water on the piston.

any help would be great thanks

*venom* · 02-04-2005, 05:21 AM

How high was the water level? If you car stalls in a flood better to get out and push then to crank the engine in the water.

tedinde · 02-06-2005, 08:57 PM

Will the motor crank. Using the starter, Or are you saying the starter wont crank the motor?? Pull the coil wire, and see if you can turn the motor either pulling by hand on the belts, or using a socket and wrench on the alternator pully, or crank pully.

spike_africa · 02-07-2005, 06:17 AM

you wont be able to Move the crank using the belt. use a socket on the crank pulley and see if the motor is froze or not. If it is you might be able to get away with just pulling all the plugs and putting some oil on top of the pistons let it soak a bit and try to break them free with a socket on the crank bolt. i have done this on Marine engiones in the Florida keys after freinds boats and mine have sunk.

eddie · 03-25-2005, 04:51 PM

i have all the pulgs out and it will not turn with a socket and 1/2" breaker bar

02-04-2005, 12:39 AM	#1 (permalink)
eddie Junior Member Join Date: Feb 2005 Posts: 6	help for a 1994 gt a we had a flood and my 1994 mustang gt 5.0L stalled in the water. i have no water in the oil or in the intake but the motor will not turn i have pulled the spark pulg and their was no water on the piston. any help would be great thanks

02-04-2005, 05:21 AM	#2 (permalink)
venom Super Moderator Join Date: Sep 2004 Posts: 5,406	How high was the water level? If you car stalls in a flood better to get out and push then to crank the engine in the water. __________________ http://www.mustangboards.com/mustang...500/ppuser/103

02-07-2005, 06:17 AM	#4 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,363	you wont be able to Move the crank using the belt. use a socket on the crank pulley and see if the motor is froze or not. If it is you might be able to get away with just pulling all the plugs and putting some oil on top of the pistons let it soak a bit and try to break them free with a socket on the crank bolt. i have done this on Marine engiones in the Florida keys after freinds boats and mine have sunk. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5.0L Foxbody Black Mustang T-Shirt - Mens Medium	New Products	New American Muscle Products	0	12-07-2006 12:05 AM
****ing newyorkers piss me off	GREG@SN95	The Lounge	21	05-29-2006 04:10 PM
Hey Randy	3V2000GT	The Parts Desk	4	05-17-2006 09:54 AM
I have some questions?	bud_3003	General Tech Forum	4	01-06-2006 08:07 PM
black friday	PureStang	The Lounge	17	11-22-2005 07:53 PM

02-06-2005, 08:57 PM	#3 (permalink)
tedinde Senior Member Join Date: Jan 2005 Location: Bear Delaware Posts: 220	Will the motor crank. Using the starter, Or are you saying the starter wont crank the motor?? Pull the coil wire, and see if you can turn the motor either pulling by hand on the belts, or using a socket and wrench on the alternator pully, or crank pully.

03-25-2005, 04:51 PM	#5 (permalink)
eddie Junior Member Join Date: Feb 2005 Posts: 6	i have all the pulgs out and it will not turn with a socket and 1/2" breaker bar