F303 cam

1BAD50 · 12-09-2005, 04:30 PM

Hey guys, I was try to find out if the f303 cam will be ok if i put it in a stock 94 gt. Dose anyone know will it work alright with any mods or do i need to check the gap between my pistons and valves. i geuss my ? realy is can i just put it in and run it or do the gap check? THanks 1bad50

bottlefedlx · 12-14-2005, 01:41 AM

if you use 1.6 rockers you'll be fine, but you need to replace the valve springs, because they will bind and floats valves, and your car will not idle. i had a e cam with 1.72 rockers and floated stock valves.

12-09-2005, 04:30 PM	#1 (permalink)
1BAD50 Junior Member Join Date: Nov 2005 Location: Leola Pa. Posts: 7	F303 cam Hey guys, I was try to find out if the f303 cam will be ok if i put it in a stock 94 gt. Dose anyone know will it work alright with any mods or do i need to check the gap between my pistons and valves. i geuss my ? realy is can i just put it in and run it or do the gap check? THanks 1bad50

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-14-2005, 01:41 AM	#2 (permalink)
bottlefedlx Junior Member Join Date: Dec 2005 Posts: 3	if you use 1.6 rockers you'll be fine, but you need to replace the valve springs, because they will bind and floats valves, and your car will not idle. i had a e cam with 1.72 rockers and floated stock valves.