Mustang Boards

Mustang Boards (/)
-   5.0L Tech (https://mustangboards.com/5-0l-tech/)
-   -   need some help (https://mustangboards.com/5-0l-tech/35798-need-some-help.html)

blkcobra09 04-13-2009 10:16 PM

need some help
 
I have a 96 V6 cobra clone with a 5.0 swap in it. Not a lot of room under the hood. What can i do to increase power without needing a lot of room?

spike_africa 04-14-2009 07:23 AM

You name it and it can be done to make more power. Heads,intakes,cam,nitrous,turbos,blowers,exhaust and the list goes on and on. The real question is what can you afford to spend to go faster and what is done already to the motor and what is your goal with the car. Is it a street only car, a street/strip car, strip only etc..

blkcobra09 04-14-2009 03:36 PM

It has a cam and flows done already. I have about $1000 to spend on it

Lazerred6 04-14-2009 03:37 PM

Nitrous oxide would be really fun for under 1k

SLP02GT 04-14-2009 05:13 PM

Nitrous would be under a grand, or you could get an upper/lower intake manifold and rear gears. Or headers and gears

blkcobra09 04-14-2009 07:28 PM

I have 3.73 gears right now, should i still get new gears then?

SLP02GT 04-15-2009 06:30 AM

nah I wouldn't bother getting different gears if you have 3.73's

spike_africa 04-15-2009 06:53 AM

So what is done to this car and what do you want to do?

blkcobra09 04-15-2009 04:04 PM

Cam, Flowmasters, Spark plug wires, Has the stock pinched headers, and thats it. Im just looking for some nice horsepower gain without spending alot or going over the top. I was thinking 65mm throttle body, aftermarket headers, and CAI. Anything else i could do? I use to have a ricer honda civic and thats why i am asking all the questions, sorry

SLP02GT 04-16-2009 07:11 PM

Headers, and upper and lower intake manifold will give you nice gains

spike_africa 04-17-2009 06:08 AM

What cam is in it? And other then nitrous with is the only power adder you can do for cheap your best bet would be long tubes, and o/r mid pipe then see what money you have left over.

blkcobra09 08-05-2009 01:09 PM

just tore it apart today and i do not have an aftermarket cam

stanger00 08-05-2009 01:33 PM

im sure you could squeeze on some heads and an intake with that amount of money...just as long as you install everything. im sure you will need some bigger injectors though and a MAF to help feed it fuel...

spike_africa 08-06-2009 07:12 AM

Why did you tear the motor apart? Upgrades I hope :)


All times are GMT -7. The time now is 01:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands