blown 86

jazer · 09-27-2007, 03:37 PM

i have a 86 mustang.it has a paxton supercharger and im getting all kinds of crank case presure.i pluged the pcv valve and add a breather on the valve cover,due to oil in the upper intake.now im getting oil thu the breather. what can i do to stop it?

spike_africa · 09-28-2007, 08:52 AM

Something like this hooked up to both PCV valves would be your best bet. It will let the extra air out of the crankcase, and it will let any extra oil be collected in the tank which you can drain whenever you need too and its cheap.

http://store.summitracing.com/partde...5&autoview=sku

However as Im sure you most likely know a working PCV system helps seal the rings with the vacuum from the motor. So you might want to look into why your getting oil tossed up onto the breather.

09-27-2007, 03:37 PM	#1 (permalink)
jazer Junior Member Join Date: Jun 2007 Posts: 6	blown 86 i have a 86 mustang.it has a paxton supercharger and im getting all kinds of crank case presure.i pluged the pcv valve and add a breather on the valve cover,due to oil in the upper intake.now im getting oil thu the breather. what can i do to stop it?

09-28-2007, 08:52 AM	#2 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 6,892	Something like this hooked up to both PCV valves would be your best bet. It will let the extra air out of the crankcase, and it will let any extra oil be collected in the tank which you can drain whenever you need too and its cheap. http://store.summitracing.com/partde...5&autoview=sku However as Im sure you most likely know a working PCV system helps seal the rings with the vacuum from the motor. So you might want to look into why your getting oil tossed up onto the breather. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO! Last edited by spike_africa : 09-28-2007 at 08:55 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode