My Mustang

90mustangGT · 09-30-2006, 04:15 PM

i just bought a 1990 mustang GT off of my friend a couple months ago, here's what is done to it so far: Mac cold air intake, BBK 70mm throttle body, 75mm spacer, Mac shorty headers, BBK underdrive pulleys, BBK fuel pressure regulator, Walbro fuel pump, MSD distributor, Ford Racing wires, Ford Racing F303 Cam, 331 stroker kit, Trickflow manifold, ford racing valve covers, edelbrock nitrous, and various billet parts. i'm looking for trickflow twisted wedge heads if anyone knows where i can get some. anyone take a guess what i would run 1/4 mile, 0-60, horsepower and torque, once i get the heads on? if you wanna know anything else just ask.

GREG@SN95 · 09-30-2006, 09:02 PM

pics... we need pics... and you can buy trickflow heads almost anywhere... check summit

ClemsonStang · 10-01-2006, 08:42 PM

if your not planning on addint boost to the car, i would go with a set of AFR 185's and what ever cam they recommend for your setup. they should make 5-15 more hp then the wedge heads, but i dont know, you will need to check your compression, because they have a smaller chamber, and i dont know what compression your 331 kit puts you at. i just like the AFR's better personally.

90mustangGT · 10-08-2006, 11:55 AM

later this summer i plan to add a Ford Racing Supercharger 9psi, to it and Ford Racing Fuel Injectors. i'll get the pics on once the stormin norman hood is on it.

90mustangGT · 10-10-2006, 10:09 AM

i dunno if anyone is interested but i have some stock 5.0 parts for sale, throttle body and EGR plate, mass air meter, wheels and tires (tires have atleast 80% left) headlights, tailights, and fog lights, stock hood, manifold upper and lower and pistons which have less than 6,000 miles on them. And for aftermarket a B & M short throw shifter and Ford Racing E303 camshaft with less than 6,000 miles on it. If your interested in anything just leave and offer. I'm looking for an aluminum head in VG condition and aftermarket wheels.

fv0stang90 · 10-13-2006, 08:56 AM

How much do u want for the shifter?? how old is it??

90mustangGT · 10-13-2006, 09:24 AM

you name the price, i dont know how old it is but its is very good shape, my one friend said you might have to get the shifter adjusted to your tranny, but name the price and put your address down, i'll give you mine and you can send a check or money order to my address.

ClemsonStang · 10-14-2006, 02:09 PM

GT or LX tail lights? what kinda shape? any fog in the head lights? and im interested in the e303 maybe.

GREG@SN95 · 10-15-2006, 10:18 PM

where are them pics?

90mustangGT · 10-16-2006, 01:06 PM

They are stock Lights, its out of a 90GT. let me know what lights you want, name some prices for the cam and the lights if you want them and i'll get back to ya about it.

90mustangGT · 10-16-2006, 01:07 PM

i'll get the pics on whenever its done, i got a stormin norman hood for it, once i get it on and the smoked lights i'll put the pics on

09-30-2006, 04:15 PM	#1 (permalink)
90mustangGT Junior Member Join Date: Sep 2006 Posts: 8	My Mustang i just bought a 1990 mustang GT off of my friend a couple months ago, here's what is done to it so far: Mac cold air intake, BBK 70mm throttle body, 75mm spacer, Mac shorty headers, BBK underdrive pulleys, BBK fuel pressure regulator, Walbro fuel pump, MSD distributor, Ford Racing wires, Ford Racing F303 Cam, 331 stroker kit, Trickflow manifold, ford racing valve covers, edelbrock nitrous, and various billet parts. i'm looking for trickflow twisted wedge heads if anyone knows where i can get some. anyone take a guess what i would run 1/4 mile, 0-60, horsepower and torque, once i get the heads on? if you wanna know anything else just ask.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
boost	dhuskers_11	V6 Tech Forums	5	06-24-2006 06:48 AM
look what I did	white99stang281	Pictures	11	06-20-2006 04:54 AM
work in progress...	Jason24	Pictures	18	11-17-2005 07:31 AM
Body Filler?	WikidStang	General Tech Forum	0	03-21-2005 06:17 PM

09-30-2006, 09:02 PM	#2 (permalink)
GREG@SN95 Banned Join Date: May 2006 Location: JACKSON NJ Posts: 4,135	pics... we need pics... and you can buy trickflow heads almost anywhere... check summit

10-01-2006, 08:42 PM	#3 (permalink)
ClemsonStang Senior Member Join Date: Aug 2006 Posts: 378	if your not planning on addint boost to the car, i would go with a set of AFR 185's and what ever cam they recommend for your setup. they should make 5-15 more hp then the wedge heads, but i dont know, you will need to check your compression, because they have a smaller chamber, and i dont know what compression your 331 kit puts you at. i just like the AFR's better personally.

10-08-2006, 11:55 AM	#4 (permalink)
90mustangGT Junior Member Join Date: Sep 2006 Posts: 8	later this summer i plan to add a Ford Racing Supercharger 9psi, to it and Ford Racing Fuel Injectors. i'll get the pics on once the stormin norman hood is on it.

10-10-2006, 10:09 AM	#5 (permalink)
90mustangGT Junior Member Join Date: Sep 2006 Posts: 8	i dunno if anyone is interested but i have some stock 5.0 parts for sale, throttle body and EGR plate, mass air meter, wheels and tires (tires have atleast 80% left) headlights, tailights, and fog lights, stock hood, manifold upper and lower and pistons which have less than 6,000 miles on them. And for aftermarket a B & M short throw shifter and Ford Racing E303 camshaft with less than 6,000 miles on it. If your interested in anything just leave and offer. I'm looking for an aluminum head in VG condition and aftermarket wheels.

10-13-2006, 08:56 AM	#6 (permalink)
fv0stang90 Junior Member Join Date: Oct 2006 Posts: 15	How much do u want for the shifter?? how old is it??

10-13-2006, 09:24 AM	#7 (permalink)
90mustangGT Junior Member Join Date: Sep 2006 Posts: 8	you name the price, i dont know how old it is but its is very good shape, my one friend said you might have to get the shifter adjusted to your tranny, but name the price and put your address down, i'll give you mine and you can send a check or money order to my address.

10-14-2006, 02:09 PM	#8 (permalink)
ClemsonStang Senior Member Join Date: Aug 2006 Posts: 378	GT or LX tail lights? what kinda shape? any fog in the head lights? and im interested in the e303 maybe.

10-15-2006, 10:18 PM	#9 (permalink)
GREG@SN95 Banned Join Date: May 2006 Location: JACKSON NJ Posts: 4,135	where are them pics?

10-16-2006, 01:06 PM	#10 (permalink)
90mustangGT Junior Member Join Date: Sep 2006 Posts: 8	They are stock Lights, its out of a 90GT. let me know what lights you want, name some prices for the cam and the lights if you want them and i'll get back to ya about it.

10-16-2006, 01:07 PM	#11 (permalink)
90mustangGT Junior Member Join Date: Sep 2006 Posts: 8	i'll get the pics on whenever its done, i got a stormin norman hood for it, once i get it on and the smoked lights i'll put the pics on